60″ Rosenthal Sheeter Mdl. Was-5-Huseaawj 2014

Listing description

Used 60″ Rosenthal Sheeter Model WAS-5-HUSEAAWJ, new 2014
This machine has seen Moderate to Light use and is in good working condition.
Information provided by Rosenthal Manfacturing
The Rosenthal Sheeter will feed, measure and cut off material at desired length. The sheet is dispensed and then removed by operator.
This system is comprised of 3 stations: Unwinding, Feed, and Cut.
The systems features and specifications are as follows:
Specifications:
The Rosenthal Sheeter is capable of processing materials that meet the following specifications:
Specification
WAS-5 Maximum Web Width 60″
H– Heavy Duty Knife
U Unwind Stand 500lbs (estimate)
S Slitting
E Static Eliminator
AA- Chain Drive
W rewinder- 12″ diameter rolls
G Edge Guide System
This machine will cut one 36 inch long sheet in 2-3* seconds and has a dynamic edge guide.
Unwind Features:
-Unwind 250 lb Maximum Capacity, 36 inch Maximum OD
-Dancer for maintaining tension control
Feed Features:
-The pulling station is powered by Chain Drive
-Nip pressure roll
-Static Eliminator
Cut Features:
-Cross Cut made by Heavy Duty Scissors Action Shear Cutting Mechanism
with linear blades.
-The top blade is fixed and the bottom blade is movable with AC motor
-Blade pressure is spring loaded
-Cutting action is Shear
-Blades are hardened D2 steel.
-No tool change required for cutting specified materials
* Note Blades wear over time
Miscellaneous Features:
– Machine painted Rosenthal standard blue
Facility Requirements:
– Acceptable range of input voltages 120v, Single Phase, 60 hz – To be confirmed
– Requires 30 amp dedicated circuit

This equipment is located in US