60 TON AMADA EG-AR 6013 ROBOTIC BENDING CELL

Listing description

system specifications

press brake
model: eg-6013
tonnage (us): 67 tons
bend length: 53.1"
distance between frames (a): 39.8"
stroke length: 6"
open height (with phl): 16.5"
number of drives: 2
approach speed: 8.7 inches per second
bend speed: 1 inches per second
return speed: 8.7 inches per second
machine length: 97.2"
machine width: 56.1"
machine height: 104.7"
weight: 8,200 lbs.
motor power: (2.9 + 1.3) kw x 2
d-axis tilt: +/- 0.08"
connected load: 12a
power requirement: 4.2 kva at 200v
vac: +/- 10%
backguage stroke: 9.8" (max 21.6") use step gauging
backguage stroke (z-axis): 2" to 8"
backguage speed (l-axis): 2,362 inches per minute
backguage speed (y-axis): 2,362 inches per minute
backgauge speed (z-axis): 787 inches per minute
control: amnc 3i

robot
type: mh6s-10 (yaskawa)
axis: dx100l (yaskawa robot controller)
payload: 22 lbs.
carriage axis: 10'
maximum reach p-point: 39.25"
repeatability: +/- 0.003"
weight: 265 lbs.
s-axis speed: 200 degrees per second
l-axis speed: 200 degrees per second
u-axis speed: 200 degrees per second
r-axis speed: 200 degrees per second
b-axis speed: 200 degrees per second
t-axis speed: 200 degrees per second

tool clamp
punch/die: amtx type iii-s
tool holder length: 49.2"
tool: modular tool stc spec. height = 6"

tool stocker
tool handling: robot
stocker length: 31.5"
number of stockers: 12 stocker (total: punch + die)
stocker location: rh side
tool weight (total): 635 lbs. (average 6.6. lbs./ 0.12 inches)
axis speed: 7.9 inches per second
acceleration: 0.2 seconds
stroke: 0 (no. 1 postion 23.4", 12 position)
soft ot: -10 ~ 23.8"
hard ot: -15 ~ 24"
includes the tooling package

This equipment is located in US