-
Machinery
Choose from 20,282 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
Coil Weight: 40,000 lbs.
Width: 12" to 66"
Line Direction: 0.010" to 0.120"
Line Speed: Left to Right
Speeds: 50 to 600 FPM
Consisting of the following:
-Cradle Style Coil Car:
40,000 lbs. Capacity
52" Wide Bed
20" Lift Height
Power Up / Down and In / Out
15 HP Drive for on board Hyd. Unit
-Aetna Standard Uncoiler:
40,000 lbs. Capacity
Hydraulic Expansion
20" to 24" ID Range
4 Segment Mandrel
76" Face Mandrel
Maker #S2-33571
User #Mec-40614-130
Traversing Base
Threading Drive
Wichita Brake
72" OD Capacity
15 HP Jog Motor
-Threading Table:
84" Wide Peeler Table
Pinch Rolls 7" Diameter x 84" Wide
Hydraulic Drives
Snubber Roll
Driven Pinch Rolls
Entry Crop Shear
84" x 0.120" Capacity
5" Rake Across Blade
10 HP Drive Motor
52" Long Blade
-Threading Table between Crop Shear and Voss Leveler
-Voss Leveler:
72" Roll Face
23 Total Work Rolls
9 Flights of Backups (7 Adjustable)
4 HI Configuration
Manual Adjustment on Backups
-Threading Table between Voss Leveler and Slitter Head
-Entry Unit:
Entry Side Guide Rolls
-(2) Slitter Heads:
(2) 72" Wide x 6.5" Dia. Arbors
75 HP US DC Motor, 1150 RPM, 230V
Gearbox 2 Speed Transmission
Inline Falk Reducer 6.256 Ratio
Upgraded to Driven Type Head with New Drives in 1992
Approx. Weight of Slitter Heads: 9,000 lbs. Each
-Threading Table between Slitter Head and Looping pit Table
-Looping Pit Table:
Two sided drop side Pit Table
Air Operated
-Threading Table between Pit Table and Tension Stands
-Tension Stand #1:
Pad Type
Entry Separator Tooling Bar
-Tension Stand #2:
Chicago 3M Roll Tension Stand and Hyd. Unit
12" OD x 76" 3M Stacked Wafer Rolls
Dual Hyd. Motors adjustable to 3000 PSI Pressure
Pinch Pressure adjustable to 3000 PSI
-Threading Table between Chicago Roll Tension Stand and Recoiler
75" x 75" Air Operated Threading Table
-Stamco Recoiler:
20" Dia. x 72" Face Drum
Powered Clamp and Expansion
Hydraulic Pushoff
Overarm Separator
200 HP DC Motor
650 / 1950 RPM, 240 V
Thru Drive-All 2 Speed Transmission with 1:1, 1.654:1 & 3.4:1 Ratios
-Exit Coil Car: Stamco
40,000# Capacity
"L" Style Car
69" x 59" Bed
-(2) Loopco Scrap Winders:
36" Tall x 12" Wide Scrap Ball
Hydraulic Motor Driven
Air Operated Mandrel Retraction
Air Operated Oscillating Guide
Side Discharge
-Main Controls and Operators Control Panel:
Eurotherm Controls, Approx. 1995
-Slitter Tooling:
Knives, Spacers & Rubbers
Knives, Spacers and Rubbers for at least 2 Full Sets
-Hydraulic Power Unit
-Electric Control Panel
This equipment is located in US
Manufacturer | Stamco |
Model | - |
Year | - |
Country | USA |
Condition | Good |
Main category | Metalworking Machinery |
Subcategory | Slitting line |
ID | P10130003 |
Client type | Machinery dealer |
On Kitmondo since | 2015 |
Number of listings | 0 |
Country | USA |
Employees | 1 - 10 |
Established | 2000 |
Last activity | June 21, 2023 |