9" x 42" Acra 2 Axis CNC Vertical Milling Machine with Fagor 8035 Controller

Listing description

New Acra 9" x 42" 2 Axis Ballscrew CNC Vertical Milling Machine with Fagor 8035 Controller. This CNC Retrofitted Milling machine is made in Taiwan and has the following features:

High Precision Spindle:

The Spindle is supported by super precision ABEC class 7 (P4) angular contact ball bearings which have been accurately measured, selected and pre-loaded, then assembled in a temperature controlled clean room to ensure high accuracy and rigidity through the full RPM range.
Low Vibration Vary-Speed Spindle Drive

Spindle motor shaft is chrome plated to ensure smooth speed changes and long shaft life. The pulleys are ground to lengthen belt life. The motor and pulleys are dynamically balanced to provide an extremely smooth and quiet low vibration drive.
Hardened & Ground Slide Ways & Table Surface

The table, knee and column slide ways and the table surface are hardened and ground for wear resistance and excellent longevity. Therefore, high machine accuracies can be maintained over the life of the machine, even with heavy usage.
High Precision Ballscrews

All models incorporate high precision ballscrews on X & Y Axis. The ballscrews provide long life and high accuracy for CNC operations.

Hand Scraped Saddle Ways:

Both the upper and lower surfaces of the saddle are laminated with Turcite-B and precisely hand scraped ways, in combination with automatic lubrication; provide smooth, accurate and long-lasting operation.

Meehanite Cast Iron:

All essential castings are made from a high grade of stress relieved Meehanite cast iron, providing superior rigidity and vibration dampering.

Specifications:

Table: 9" x 42"
Longitudinal Travel (X-Axis): 6"
Cross Travel (Y-Axis): 8"
Vertical knee Travel (Z-Axis): 16"
Spindle Taper: R8
Table T-Slots: 1" x 0.6"
Spindle Speeds: 60-4,200 RPM
Spindle Nose to Table: 6" ~ 18.5"
Spindle Centerline to Column: 7" ~ 18.7"
Quill Travel: 7"
Overarm Travel: 12"

Standard Equipment:

Fagor 8035 CNC Controller
AC Servo Motors
Rubber Ways Covers (front & back)
Auto Lubrication
Ball Screws on X, Y, & Z Axis
Work Light

Fagor 8035 Controller Features:

Automatic, single step, manual and teach-in modes
Machining canned cycle
Selectable display resolution
Automatic & programmable homing
Setup assistance
Parameter setup with security levels
Mid-program block start & block search
Inch/Metric conversion
Rotation, mirroring & scaling, plus rigid tapping
7.5” Color LCD Screen
Limit switches
RAM: 256KB; CF Card: 128 MB; USB; DNC/RS232
Linear, Circular, Helical Interpolation
Retrace Function
Look Ahead: 75 Blocks
Displays

Feed rate; Tool number; Diameter and Length offset; Program/Distance to go/Machine position (Toggle); Loop counter & Dwell time; Timer & parts counter.
Graphics

Isometric, X/Y, X/Z & Y/Z view; automatic fit; window zoom; tool display; simulate a section of the entire program
Compensations:­

Diameter/radius, length offsets; length offset calibration (input to table); leadscrew compensation; backlash compensation; lLinear compensation.
Programming

Absolute/incremental; polar/cartesian coordinate

This equipment is located in US

Please note that this description may have been translated automatically.