Agie-Futura Mondo 20

Listing description

Agie model "Mondo 20" cnc ram type edm

new: 1998

Travels:
X axis ................................. 11.8"
Y axis ................................. 9.8"
Z axis ................................. 9.8"
Worktank inner dimensins ............... 25" x 17" x 10.6"
Work table ............................. 15.7 x 11.8"
Throat clearance ....................... 14.3"
Max. Workpiece weight .................. 440 lbs.
Platen to table clearance .. ........... 10.6" to 20.4"
Max. Electrode weight .................. 55 lbs.

Minimum command unit ................... 0.00004"

Dielectric fluid res. .................. 66 gallons

Approx. Dims (machine) ................. 53" x 57" x 87"H
Approx. Dims. (control) ................ 36" x 46" x 85"H
Approx. Machine weight ................. 3,000 lbs.

Features:
Agie "Futura iv" cnc control & power supply, s/n: afiv-ipm-001256
3-axis cnc (x, y, z)
Crt display
Os drive
Rs232c interface & floppy disc drive
Manual pendant control

Control features:
Edge find - automatically positioning on the workpiece

(x, y & z axes).
Inside center find - automatically finds the center of a

Cavity on the x or y axes, or on both the x & y axes.
Outside center find - automatically locates the center of

The workpiece on the x and y axes, or on both the x & y axes.
Corner find - automatically locates the corner of the workpiece.

Orbit data - there are (5) types of planetary:
Circular
2d vector
3d vector
3d point
Continuous circle

Process optimizer:
"Aco" - permits automatic optimization of the erosion (edm) process.
Gap compensate - type of overcut compensation for which the

Machine must take into account in order to reach the exact

Workpiece dimension in z, and also laterally.
Unigap - the z axis stops & dwells at z depth for a selected

Time during which the generator& servo remain on

(spark-out).
Used to improve the frontal roughness.

Equipped with:
40 amp power supply
Os operating system
Floppy drive
Hi-polarity option
Work light
High voltage & capicitance option -(for edm machining of
very small surfaces or
Very fine roughness.
Adds capacitance to erosion gap.
Machine is presently wired for 220 volts, 25 kva, 18 amps

This equipment is located in US