Agilent 7900 ICP-MS System
The Agilent 7900 ICP-MS System is a flexible quadrupole mass spectrometry system that provides the industry’s lowest detection limits, widest dynamic range, and most effective helium collision mode. As a result, you can be sure of reporting accurate data every time, even at trace levels.
Agilent 7900 ICP-MS
Agilent SPS 4 Autosampler
Agilent G3292A Recirculating Chiller
Agilent MS40 Roughing Pump
Cables and connectors
The 7900 ICP-MS provides the highest performance for commercial and industrial applications, with the flexibility needed for advanced research. High sensitivity and fast acquisition of transient signals – necessary for analysis of nanoparticles, single cells, and for laser ablation – give you the edge over the competition.
Unprecedented matrix tolerance – The 7900 ICP-MS has a robust plasma and optional Ultra High Matrix Introduction (UHMI) technology that enable you to routinely measure samples containing up to 25% total dissolved solids (TDS)—100 times higher than the traditional matrix limit for ICP-MS, and far beyond the capability of any other current system.
Widest dynamic range – The new orthogonal detector system (ODS) delivers up to 11 orders-of-magnitude dynamic range from sub-ppt to percent-level concentrations, enabling you to measure trace elements and majors in the same run.
Better trace level detection – Novel interface design and optimized expansion-stage vacuum system increase ion transmission, providing >109cps/ppm sensitivity at <2% CeO, while the ODS provides increased gain and reduced background for improved signal to noise.
Faster analysis of transient signals – With 10,000 separate measurements per second, the 7900 ICP-MS provides short integration times for accurate analysis of transient signals.
Unmatched ease-of-use – The latest generation of ICP-MS MassHunter software features an intuitive dashboard layout that guides you through every step of the analysis. The innovative Method Setup Wizard automatically builds your methods based on a few simple questions about your application, or from analysis of a typical sample. For added flexibility, you can also use the remote monitor app to check and control your ICP-MS wherever and whenever you want.
Improved productivity – Ultra-high matrix introduction (UHMI) technology combined with optional Integrated Sample Introduction System (ISIS 3) and ODS ensures almost any sample can be run and quantified across the widest dynamic range, eliminating the extra time and cost associated with reruns due to over range results.
Note: Licenses for Agilent’s software products are not transferable. Any customer who purchases Agilent products are advised to contact Agilent for license requirements.
All Brand Names and Logos depicted at our website are the trademarks of the respective companies. We are not their representatives nor authorized resellers.
Agilent 7900 ICP-MS Specifications (238 kB)
Agilent 7900_ICP-MS_wall_poster (19 MB)
Agilent 7900_ICP-MS_ Food Safety -Application Note (3 MB)
Agilent 7900 ICP-MS_Troubleshooting_and_Maintenance (5 MB)
Agilent 7800_7900_ICP-MS_Site_Preparation_Checklist (2 MB)
Agilent 7800_7900_8900 ICP-MS Supplies (203 kB)
Agilent 7900 ICP-MS BROCHURE (8 MB)
Agilent 7900 ICP-MS Biomass Brochure (4 MB)
Agilent 7900 ICP-MS_Clinical Research Application Brief (374 kB)
Agilent 7900 ICP-MS_ Pharma & Biopharma_ Application Note (914 kB)
Agilent 7900 ICP-MS_Geochemistry_Mining_ & Metals -Application Note (721 kB)
|Client type||Machinery dealer|
|On Kitmondo since||2011|
|Number of listings||185|
|Employees||11 - 50|
We were established in 2007 and are located in California. with clients in over 40 countries. We are a leading global provider of high quality used lab equipment. Specializing in: Decontaminatio... read more
We were established in 2007 and are located in California. with clients in over 40 countries. We are a leading global provider of high quality used lab equipment. Specializing in: Decontamination, Method Development, Service & Repair, Trade, Training, Used & Refurbished Equipment. We are your one-stop source for all your lab equipment needs! We are for Scientists, by Scientists.
|Last activity||Oct. 28, 2020|