Amada F0-3015 NT

Listing description

AMADA F0-3015 NT 4000 WATT CNC LASER CUTTER 2005

AMADA F0-3015 NT 4000 WATT CNC LASER CUTTER
MFG Date: 2005
Sheet Width 61"
Sheet Length 122.8"
Wattage 4000 Watts
IPM 3149
X axis travel 122.8"
Y Axis Travel 61"
Z Axis Travel 11.8"
Control Type Fanuc NT
Rebuilt 24000 Turbo, Vacuum pump , Slats and Optics
1.1 Motion Package
Travel Method: Stationary table, X, Y and Z-axis movement for cutting
Control Method: X, Y and Z simultaneous 3 axis control
Drive Motors: Fanuc AC servo motors
Maximum Sheet Size: 61" (Y) x 122.8" (X)
Maximum Axis Travel: 61" (Y) x 122.8" (X) x 7.87" (Z) *
Maximum Axis Positioning Speed: 3,150 inches per minute (80m/min)
Per axis: 4,554 inches per minute 45o vector. *
Maximum Speed Z-Axis: 2,362 inches per minute
Positioning Accuracy: 0.0004"/20"
Maximum Material Weight: 1,875 lbs.
Assist Gas: 4 ports with NC pressure Control
Machine Footprint: 385" x 107"
Machine Weight: 34,250 lbs
Electrical Requirement: 208V, 3 Phase, 60Hz, 10KVA
Model: Fanuc NT
Display: LCD Color Graphics Display
Minimum Command Unit: 0.0001" (X, Y, Z)
Minimum Travel Unit: 0.0001" (X, Y, Z)
Operating Modes: Automatic, MDI and Manual
Display Modes:
Program Contents, Position Information, Program Check, Settings, Parameters, Beam Diameter Compensation, Assist Gas Status, Self Diagnostics Interlock Displays
Cooling Water Status, Gas Pressure Status, Vacuum Status, Turbo Blower Malfunction, Shutter Status, Beam Power, Resonator Discharge, Door Open, WACS.
1 Ton Lift for material

This equipment is located in US