Amada RG-125

Manufacturer Amada
Model RG-125
Year 1998
Country USA USA
Condition Good
Main category Metalworking Machinery
Subcategory Press Brake
ID P80912009

AMADA RG-125 137 TON X 122"
Bending length ....................... 122"
Throat Dept .......................... 13.75"
Stroke Length ........................ 3.9"
Number of cylinders .................. 3
Max pressure PST...................... 4203.2
Speed Rising In/Sec .................. 1.57"
Mm/sec Bending ....................... 9"
Motor HP ............................. 15
Tank Capacity ........................ 24.8 gal.
Machine Weight ....................... 16,000 LBS

EQUIPPED WITH:
* Amada NC9-EXII:
Feed speeds - L axis 30mm (98.4 ft)
D axis 1mm (3.28 ft)
Repetition Accuracy - L axis 0.01mm ( 0.0004 in)
D axis 0.01mm ( 0.0004 in)
Movement Range - L axis 0 to 500mm (0 to 19.685 in)
D axis 0 to 99.99mm (0 to 3.9331 in)
Command Unit - L axis 0.01mm or (0.0001 in)
D axis 0.01mm or (0.0001 in)
Number of drive axis - 3 (L1, L2 & D)
Input method - ten key numeric pad
Memory capacity - 99 steps
Memory Backup - battery system
Height Adj. of Back Gauge Finger
From upper surface of lower beam to 90 to 165mm
Lower surface of finger set at (3.5 to 6.50 in)
Center Manual

We add hundreds of new listings every week. Be sure not to miss any Amada RG-125 by subscribing to our email updates.

We also send announcements for upcoming auctions for Metalworking Machinery.

We hate spam as much as you do

None