-
Machinery
Choose from 20,033 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
The AMADA VIPROS 358 KING turret press, built in 1999 in Japan, is used to punch holes in sheets made of ordinary steel, stainless steel and aluminum. Details with a maximum length of 1250 mm, a width of 3000 mm and a weight of 50 kg, are processed with a force of 30 tons on the brush table of the machine, protecting the sheet surface against various scratches and scratches.
Two hydraulic clamps are installed on the work table to hold the sheet properly during the entire punching process. In one minute, the turret press performs a maximum of 1,200 strokes per minute. The sheet metal punching machine is equipped with 58 tool stations (including 4 indexing stations), the FANUC AC Servo X and Y axis drive and the FANUC Series 18-P CNC controller, which allows you to control all the functions of the machine.
Throughout its lifetime, the AMADA VIPROS 358K punching machine was regularly serviced. The total weight of the machine is 16,000 kg.
Technical specification of the AMADA VIPROS 358 KING punching machine
- pressure force: 30 t (294 KN)
- punched details: ordinary steel, stainless steel, aluminum
- maximum sheet length: 1250 mm
- maximum sheet width: 3000 mm
- maximum sheet thickness (mild steel): 3.2 mm
- maximum workpiece weight: 50 kg
- number of tool stations: 58 - including:
Station A: 24
Station B: 26 (including 2 indexed)
Station C: 4
Station D: 2
Station E: 2 (including 2 indexed)
- maximum number of strokes: 1200 / min
- minimum bore diameter: 12 mm
- maximum hole diameter: 114 mm
- feeds in the X / Y axes: 1270/4000 mm
- accelerated feeds in the X and Y axes: 113 m / min
- revolver speed: 30 rpm
- punching accuracy: ± 0.01 mm
- man-hours: 83 995 h
- stroke counter: 44 222 800
- total power requirement: 28 kVA
- dimensions (length x width x height): 4580 x 4120 x 2450 mm
- weight of the machine VIPROS 358 KING: 16,000 kg
AMADA VIPROS 358 KING turret press equipment
- CNC control: FANUC Series 18-P
- X, Y axis drive: FANUC AC Servo
- brush table
- hydraulic sheet clamps: 2 pcs.
- central lubrication
This equipment is located in PL
Manufacturer | Amada |
Model | Vipros 358 King |
Year | 1999 |
Country | Poland |
Condition | Good |
Main category | Metalworking Machinery |
Subcategory | Punching machine |
ID | P21007176 |