Balliu CF 1500/PS

Listing description

Description: Laser BALLIU CF 1500 / PS, 3.5 kW, year 2005, in operation under current, possible inspection, regularly serviced. It is a CO2 laser with linear motors and uses a laser resonator SPAB Rofin Sinar. Advantages of this laser source: Cheap operationSmall Demand for rare gases such as Helium and Argon. The machine only needs dewatered frozen air for operation. It still has its own Donaldson freezer and therefore does not need nitrogen 5.0 for operation. Black sheets cut with oxygen 4.0 and higher, stainless steel sheets with nitrogen 4.0 and higher. which means that it cuts black sheet metal up to 18 mm and stainless steel up to 8 mm. It has Siemens linear motors, so it almost requires no maintenance and does not wear mechanically, has no screws or combs. able to keep themselves directly in operation, the resonator is a patented device and once a year an authorized service is performed = approx. 3,000 EUR ozuMachine is in operation, offer without transport and installation. The machine is a compact, welded frame poured with polymer concrete, can be transported to a jumbo height of 60 cm above the road. Installation by the manufacturer's technician takes a maximum of a week. Technical parameters: Sheet metal format: 3000 x 1500 mm Laser power: 3500 : Rofin Sinar 3,500 WFires black sheet metal up to 18 mm and stainless steel up to 8 mm Siemens linear motorsTwo-exchange palletsMachine weight: approx. 20 tons

This equipment is located in CZ