-
Machinery
Choose from 20,034 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
•Pre-Milling Unit- To rectify the edge of the panel with 2 HF motors - 12.000 rpm – 2.5 hp (1.8 kW) each and separate time entrance: 1st motor spinning anti-clockwise; 2nd motor spinning clockwise. •Edge Trimming Unit - To carry out the trimming of edge excess at the front and rear portion of the panel with 2 tilting motors HF 0.5 hp (0.37 kW). •Top and Bottom Trimming Unit - To carry out top and bottom fine trimming of the edge with 2 motors HF 1 HP (.75 kW). Micrometric adjustment with numerical readout. •Scrapping Unit - To scrape the edge of the tape using knife scraping. Micrometric adjustment with digital readout. •Brushing Unit - To carry out the cleaning and polishing of the applied edge using cloth disc brushes with 2 motors 0.25 hp (0.18 kW) with cloth discs dia. 3.8" - 100 mm. •1 suction hood dia. 2" / 50 mm •1 suction hood dia. 3.9" / 100 mm •Separate box to collect ABS chips •Installed Power: 12 KW •Weight: 3550 lb / 1610 Kg •Multi-Tap Transformer •Electrics: 220V, 480V, 575V, 3 Phase 60Hz. •Dimensions: 173" x 67" x 75" / 4400 x 1700 x 1900 •CE standards •Min width of the panel 3.2" / 80 mm •Min length of the panel 11.8" / 300 mm •Max thickness of the panel 1.8" / 45 mm •Min thickness of the panel 0.39" / 10 mm •Edge dimensions in rolls ABS 0.02" - 0.12" / 0.4 - 3 mm •Edge dimensions in strips 0.02 - 0.32" / 0.4 - 8 mm •2 Feed speeds 39-53 ft/min / 12-16 m/min •Air pressure 6 bar
This equipment is located in US
Manufacturer | Biesse |
Model | Spark 5.8 |
Year | - |
Country | USA |
Condition | Good |
Main category | Woodworking |
Subcategory | Edgebander |
ID | P90315011 |
Client type | Machinery dealer |
On Kitmondo since | 2014 |
Number of listings | 0 |
Country | USA |
Established | 1977 |
Last activity | May 26, 2023 |