Bodor T6E laser cutting machine

Listing description

BODOR T6E pipe and profile cutting laser was built in 2018. The BODOR T6E laser with an automatic feeder is a very efficient 750 W laser with a stable operating system. Guarantees the best cutting results. It is equipped with a double cooling system, lubrication system and dust extraction system. The laser cuts pipes and profiles with oxygen and nitrogen. He has worked about 120 hours. It is designed for effective cutting of round, square, rectangular, oval and other pipes with a special shape with a cutting length of up to 6 m.

Technical parameters of the BODOR T6E laser

- source power: 750 W
- maximum tube length: 6000 mm
- minimum tube length: 2000 mm
- maximum pipe diameter: 200 mm
- minimum pipe diameter: 20 mm
- maximum dimensions of a square profile: 140 x 140 mm
- maximum wall thickness of the profile, cutting thickness: approx. 4-5 mm (depending on the type of material, the stainless steel to be cut will be thinner. Profile dimensions: from 20x20 mm to 140x140 mm, length 6000 mm)
- minimum dimensions of a square profile: 20 x 20 mm
- maximum profile weight: 20 kg / rm
- maximum travel in the X axis: 250 mm
- maximum travel in the Y axis: 6500 mm
- maximum travel in the Z axis: 150 mm
- maximum angle of rotation in the W axis: no limit n * 360
- maximum rotation speed: in the W axis: 80 rpm
- maximum acceleration in the X axis: 1G
- maximum acceleration in the Y axis: 0.6G
- maximum type of handle: electric
- maximum load on the handle: 150 kg
- protection class: IP54
- machine power consumption: 16 kW
- machine dimensions: 12000 x 4500 x 2400 m
- weight: 4 600 kg
- maximum axis positioning speed:
- X axis: 40 m / min
- Y axis: 0.5 m / min
- Z axis: 30 m / min
- laser axis positioning repeatability:
- X axis: +/- 0.03 mm / m
- Y axis: +/- 0.03 mm / m
- Z axis: +/- 0.005 mm / m

BODOR T6E laser components

- Front and rear fully servo driven electric chuck with 20-200mm clamping diameter
- Bodor Genius laser head
- French Schneider servo motor
- Japanese NSK bearings
- French Schneider electronic components
- Japan SMC pneumatic components
- Taiwan YYC rack
- System of automatic lubrication of guides
- Smoke exhaust system
- Cypcut operating system

This equipment is located in PL