Brew House with 5 hl Volume Eurolux Brew House with 5 hl Volume

Listing description

Eurolux Brew House with 5 hl Volume per brewery process
Garagebrewery, Microbrewery, Craftbrewery Complete
2 brews / day = 10 hl NEW!

technical data:
energy consumption – electricity, gas, water, cooling

energy for pump, agitator, cutting mechnism – 2,5 kW/h
gas 8 kg per brew
water 1,5 cbm per brew
cooling 3 kW per day

Declared vaues are approximative values. The cooling is depending of the size of the cold store.

Basic Equipment

The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl)

Technology

All the pipes can be cleaned and sterilized in the circuit over the pump included.

a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun.
b) After the lauter wort will be pumped back to the mash boiler.
c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool.
d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool.

Mashing Tun / Wort Boiler
Volume brutto: 650 Liter
Volume net: 500 Liter
Heating system: gas burner propan
Insulating: 60 mm
Material: stainless steel (AISI 304 - 1.4301)

Mashing tun mounted on the frame with 3 stainless steel feet. On the top of mashing tun are cylinder conic cap, which is able to open (manhole) for working.
Also on the top are connection for agitator, water, and cleaning over one spray ball. The temperature sensors PT100 are on the site on mashing tun for the temperature control.

Lauter Tun / Whirlpool
Volume brutto: 650 Liter
Volume net: 500 Liter
Bottom: Strainer for wort
Insulating: 60 mm
Material: 1.4301

Lauter tun mounted also on the frame with 3 stainless steel feet. On the top of tube are cylinder conic cap, which is able to open for working (also with manhole). On the site are existing loop hole for to drain brewers grains (draff).

The brew house will be completely installed before delivery for works inspection. All connections/fittings for water pipe, gas and electrical, exhaust vapour, chimney and waste discharge must be done by the client in order to start the production.

This equipment is located in DE