Calypso Hammerhead

Listing description

General Description

2006 Calypso CNC water jet.
American made..
table :4ft x 4ft
It was purchased in February of 2016 for
those just in-case scenarios. It was in
a government facility and was OVERLY maintained as it has a TOTAL OF 500 HOURS ON IT!!!!!
It has a KMT 30k (S30) pump and the high pressure
cylinders (if you know anything about water its) have never even been removed. This unitshows like brand new.
cost new ($169,000.00 NEW)
4’ X 4’ Waterjet Cutting System with Calypso PC Based CNC Controller, KMT 30HP 60KPSI Intensifier Style Pump, Up To 1,500 IPM Cutting Speeds, 800 LB Bulk Abrasive Feeder, Programmable Z-Axis, Sealed Control Cabinet, Sealed Waterproof Keyboard and Closed Loop AC for Control Cabinet and with only 500 Operating Hours this system is in “As-New” condition!
std mfg specs below-please verify actual machines
GENERAL FEATURES:

Bridge Gantry X-Y table on Uniframe – Full 5 Feet X 5 Feet Work Area
Fully Sealed Bellow System
Servo Controlled Z axis, with Auto Tool Lift and Nudge Jog
Abrasive Cutting Head
30 HP Intensifier Pump – 60,000 PSI Operating Pressure
Control Console – Industrially Hardened
PC Computer with Windows OS

Calypso’s Exclusive Software Suite – from Drawing to Part
Abrasive Bulk Hopper
Digital Abrasive Metering system
“Rain Gutter” helps provide clean work area

GENERAL SPCIFICATIONS

Actual X axis travel (Bridge travel or width):49”

Actual Y axis travel (depth):49”

Z Axis Travel:6” to top of bed

Table Width:67.5” between side frames

Table Depth:55”

DRIVE SYSTEM AND GUIDEWAY SYSTEM

Bridge Gantry Driven From Both Sides

Machine Squareness Maintained Electronically

4-Axis

True Closed Loop Servo Drive System – Loop Is Closed Back to the Controller

Brushless Servo Motors

Precision Rack and Pinion Drive System/planetary Low Backlash Gearheads

Speed Range (standard): .1 To 500 IPM Standard

Straight Water Cutting Speeds: Up To 1500 Ipm

Recirculating Ball Bearing Runner Blocks On Hardened Precision Ground Ways.

360° Bellows Seal All Motion Components From Abrasive Invasion

ABRASIVE SYSTEM

Bulk abrasive Hopper: The system includes a completely integrated Bulk Transfer Vessel, with reinforced flexible transfer hose. The system uses shop compressed air, and can be placed to either side of the cutting table, and has a maximum capacity of 800 lbs.

Digital Abrasive Control (DAC): Digitally commanded from the PC Control system, DAC provides precise metering and control at the cutting head. The system is computer controlled, the desired abrasive flow rate can be quickly changed at the PC control.

CONTROL SYSTEM:

Calypso’s exclusive control software is the easiest to use in the industry, and

provides multiple options that improve cutting control, as well as including costing, array nesting, and other features that are “extra” on other waterjet systems.

Control Console: Calypso systems utilize a roll around, industrially hardened console that contains the PC computer; control electronics and servo drive

hardware. The PC utilizes the current standard in PC processor speed and hard drives and Windows OS. The system includes a Ethernet card and external sealed Ethernet port. The console has an external 4-port USB hub to accept memory sticks.

Exterior cables plug directly to military grade connectors on the main control circuit board and operator buttons reside on the front panel board.

HIGH PRESSURE SYSTEM:
The system utilizes a 30HP 60KPSI Intensifier Style Pump Manufactured Exclusively for Calypso by KMT Waterjet System. This pump is fully integrated to the operating system and controller of the machine and features:

(1874) 2006 Calypso Hammerhead 55 Waterjet Cutting System - Pic 18.jpg

Dual Pressure Control for automatic High/Low cycling of pressure.

Long slow stroke intensifier for extended seal life.

Ceramic plungers for increased plunger life.

Cartridge quick-change hydraulic seal design.

Long seal life design.

High efficiency Heat Exchanger

Quiet operation

INCLUDES: Calypso PC Based CNC Controller, KMT 30HP 60KPSI Intensifier Style Pump, Up To 1,500 IPM Cutting Speeds, 800 LB Bulk Abrasive Feeder, Programmable Z-Axis, Sealed Control Cabinet, Sealed Waterproof Keyboard and Closed Loop AC for Control Cabinet and with only 500 Operating Hours this system is in “As-New” condition!
we purchased a larger Calypso Water Jet new in 2006 and know this machine inside and out! We
run our larger water jet every day and wouldn't even consider a different brand. we would be willing to throw in some training and/or help
in the future as he has been working with
the same software as on this new unit for 12 years now.

This equipment is located in US