Cantek Mx340 Edgebander

Listing description

Description

The MX340 from Cantek is designed to be a compact and durable edgbeander offered at an affordable price. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thickness between 0.4 and 3 mm.

FEATURES:

PLC Control system with LED display and keypad
Workpiece is fed by chain
Edge coil support plate
Edge feeding is automatic with a thickness capacity of 0.4 to 3 mm; Strip material can be hand fed
Coil edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears
Teflon coated hot-melt glue pot
Spring loaded pressure unit with (2) pressure rollers
High Frequency, 12000 RPM end trimming unit
High Frequency, 12000 RPM top and bottom trimmers with insert knife cutters for radius trimming and bevel trimming
Radius scraper with 2 mm radius
3000 RPM top and bottom buffing units
Heavy duty pressure beam with extendable workpiece support
Heated infeed fence for pre-heating the panel from optimum glue penetration

SPECIFICATIONS:

Feed speed: 29.5 FPM
0.315" to 4.77" Panel thickness capacity
0.4 to 3 mm edgebanding thickness capacity
Minimum panel width: 4"
Minimum panel length: 6.69"
Total connected power: 7.4 HP
Machine dimensions: 116" x 44" x 55"
Machine weight: 1,144 Lbs.
37 Amps at 230 V SINGLE PHASE

Prices and specifications are subject to change without notice. Dimensions and weights do not include crates or packaging. We measure and weigh each machine and/or crate prior to shipping and will be happy to provide this information to you upon request.

This equipment is located in US