CCS Musicam Prima LT Audio Codec with ISDN S/T Interface card TA201
Prima LT is the newest addition to our line of superb digital audio codecs. It is stereo, bi-directional, and comes with our enhanced MPEG Layer 2, MPEG Layer 3 and G.722 algorithms for maximum compatibility. Prima LT accepts one digital interface module for direct connection to ISDN, V.35, X.21 or RS422.
The Prima LT digital audio codec offers the same superb audio specifications as the CDQPrima line of codecs. With our enhanced MPEG Layer 2, MPEG Layer 3, and G. 722, Prima LT offers ISDN connectivity at bit rates ranging from 56 to 128 kb/s. Bit rates from 24 to 384 Kbps are supported with other digital transmission facilities.
Unlike other audio codecs, the microprocessor-controlled Prima LT is equipped with powerful programming functions. Using Prima Logic Language you can program your Prima LT to perform functions such as:
Automatic call configuration
Automatic algorithm detection
The Prima LT uses plug-in modules allow you to connect directly to ISDN or to any digital transmission system with available V.35, X.21 or RS422A interfaces. The Prima LT’s broadcast mode allows you to send two independent audio channels to two locations, or send the same the monaural program to two locations simultaneously.
Other features include:
Universal power supply - no need to change power supply frequency and voltages
Universal terminal adapter - no need to change ‘ROM’ chips when taking your Prima LT to different countries
Gold plated audio connectors and twenty-four bit A/D and D/A converters insure superb audio specifications. Our advanced audio circuitry yields remarkable performance – 20 to 20 kHz bandwidth with better than 92 dB signal-to-noise ratio and 0.01% THD+N.
AES/EBU or S/PDIF digital audio I/O is available. Built-in high-quality rate adapters allow 24.05, 32, 44.1 and 48 kHz digital audio sampling rates with internal or external synchronization.
Fully compatible enhanced MPEG layer 2, MPEG layer 3 and G.722 algorithms support bit rates from 24 through 384 kb/s and sampling rates from 16 to 48 kHz. CCS Inverse Multiplexing and H.221 BONDING protocols are standard. The Prima LT is fully Eureka DAB compatible.
Storage for 256 Speed Dial and Quick Configuration entries. Each Speed Dial entry contains all encoder and decoder configuration information and up to two ISDN phone numbers. The Prima LT comes pre-programmed with over three dozen of the most use configurations, including configurations used to connect to other manufacturers products.
Storage for up to 20 ISDN TA configurations, each includes all TA settings, SPID and ID numbers.
Ancillary data includes far end remote control, RS232 data and 12 virtual control lines.
Virtual actions can execute the sequence of commands on any connected Prima LT or CDQPrima.
Near and far-end remote control using an attached terminal or PC with RS232 or RS485 support. RS485 remote control allows up to 30 Prima LT or CDQPrima units to be controlled by the same PC.
An optional Windows remote control program is available for easy point-and-click operation.
Software updates, available on our Internet Web Site, can be located directly into the Prima LT through the remote control port.
All functions can be password protected with unique multi-level security system.
ANALOG AUDIO SPECIFICATIONS
Connector Type: Gold plated Neutrikâ 3-pin XLR
A/D & D/A converters: 24 bit sigma-delta
Sample frequencies: 16, 24, 32, or 48 kHz
Input impedance: 600 Ohms or >25 kOhm, balanced
Output impedance: 600 Ohms or < 60 Ohms, balanced
Clipping level: +12, +15 or +18 dBu, ± 1 dB
Insertion gain: 0 dB ± 0.5 dB
System frequency response: ± 0.3 dB, ref. @ 1 kHz.
20 to 7,500 Hz @ 16 kHz sampling
20 to 11,250 Hz @ 24 kHz sampling
System frequency response: ± 0.15 dB, ref. @ 1 kHz.
Layer II and Layer III
20 to 14,500 Hz @ 32 kHz sampling
20 to 20,000 Hz @ 48 kHz sampling
Total harmonic distortion + noise: <0.005% @ 1 kHz
Signal-to-noise ratio: >95 dB
Crosstalk: <-90 dB
L/R phase difference: <0.5°
ISO/MPEG Layer II (enhanced)
ISO/MPEG Layer III
DIGITAL AUDIO SPECIFICATIONS
Connector type: DB9, female
Optional XLR adapter available
Interface type: AES/EBU or S/PDIF
Digital audio sampling rates: 24.05, 32, 44.1 and 48 kHz
Rate adaption: Automatic
Lock range: ± 200 ppm
DATA INTERFACE SPECIFICATIONS
Network interface types: ISDN BRI (2B + D), RS530, RS422, V.35 and X.21
Number of ISDN B channels supported: 1 or 2
Layer II: 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144, 160, 192, 224, 256, 320 or 384 kb/s.
Layer III: 56, 64, 112, 128, 192, 256 or 320 kb/s
G.722: 56 or 64 kb/s
AUXILIARY DATA CHANNEL
Type of connector: DB9, female
Bit rate, direct mode: 300, 1,200, 2,400, 9,600 and 38,400 bps
Bit rate, Mux mode: 300, 1,200, 2,400, 9,600 and 19,200 bps
Mode: 8 data bits, 1 stop bit
Handshake: None required
Type of connector: DB9, male
Functions: Summary alarm
Type: Form C contacts
Keypad: 24 key with cursor, dial, function and status keys
Level indicators: Normal and Clip LEDs
Remote control: All Features controlled
Electrical interfaces: RS232-C or RS485
Connector: DB9, male
Bit rates: 1,200, 2,400, 4,800, 9,600 and 38,400 bps
Mode: 8 data bits, 1 stop bit, no parity
Handshake: None or XON/XOFF
|Client type||Machinery dealer|
|On Kitmondo since||2017|
|Number of listings||258|
|Employees||1 - 10|
UAE’s only one-stop shop for used and refurbished broadcasting equipment. Home to the only inventory of used, refurbished and demo equipment in the Middle East, we buy and sell high-quality used... read more
UAE’s only one-stop shop for used and refurbished broadcasting equipment. Home to the only inventory of used, refurbished and demo equipment in the Middle East, we buy and sell high-quality used broadcast and AV equipment to radio and TV customers primarily in the Gulf as well as other parts of the word.
We source our equipment from premier broadcasters in the region and employ an efficient team of engineers to refurbish and service the gear we have acquired before selling them. All used broadcast equipment comes with a three-month warranty.
We have successfully provided integrated solutions and equipment to end users in U.AE, Egypt, India, Jordan, Pakistan, Afghanistan, the Philippines and Turkey.
Having established a firm foothold in the Middle East and Asia, BSBroadcast is constantly looking to extend its portfolio of equipment and solutions through partnerships with leading European and American used equipment dealers
The Ceo, who has worked in MENA region to build broadcast facilities from scratch, established BS Broadcast in 2016. On this journey, the CEO identified a need among customers for revamped and restored equipment at lower costs. Additionally, he has been active in the Middle East and South Asian broadcasting industry since 1999 and has developed a vast network of contacts that came with requirements for used equipment.
In essence, the company was born out of these demands and presently serves customers worldwide. Having a base in the UAE has helped facilitate easy shipment across the globe.
Our inventory includes an extensive range of 3G/HD/SD equipment including playout servers, satellite antennae and terminals, RF modulators, frequency converters, multiplexers, HPA, SPG, waveform monitors, up-converters, routers and switchers, and more from the world’s leading manufacturers.
Whether rotating out your existing equipment, or clearing out your storage area, bsbroadcast.com can assist you in securing maximum value for your investments. Should you want a quote for your used systems cameras, broadcast lenses, mixers or SR decks, please contact our trade sales team.
|Last activity||Jan. 25, 2020|