Cincinnati Anaconda-H 45

Listing description

This Machine is New, Never Installed This Machine is New, Never Installed  
Swing Over Bed: Swing Over Bed: 45.9" 1165.86mm
Swing Over Cross Slide: Swing Over Cross Slide: 33" 838.20mm
Swing Over Gap: Swing Over Gap: 63.4" 1610.36mm
Center Height: Center Height: 23.2" 589.28mm
Gap Width From Headstock: Gap Width From Headstock: 23.6" 599.44mm
Spindle Bore Diameter: Spindle Bore Diameter: 6" 152.40mm
Distance Between Centers: Distance Between Centers: 160" 4064.00mm
Main Spindle Motor: Main Spindle Motor: 30 HP 22.37 kw
Spindle Speeds (18-Speed): Spindle Speeds (18-Speed): 5 - 630 RPM 5 - 630 RPM
Bed Width With, Without Auxiliary Guide: Bed Width With, Without Auxiliary Guide: 28.1", 31.5" 713.74mm , 800.10mm
Cross Slide Travel: Cross Slide Travel: 31.5" 800.10mm
Compound Rest Travel: Compound Rest Travel: 19.7" 500.38mm
4-Way Tool Post Width: 4-Way Tool Post Width: 10" 254.00mm
Longitudinal Feed: Longitudinal Feed: 0.0018" - 0.1" IPR 0.05mm - 2.54mm IPR
Cross Feed: Cross Feed: 0.0009" - 0.05" IPR 0.02mm - 1.27mm IPR
Longitudinal Rapid Feed: Longitudinal Rapid Feed: 78.7 IPM 33.32 mm/sec
Cross Rapid Feed: Cross Rapid Feed: 50 IPM 21.17 mm/sec
Tailstock Quill Diameter: Tailstock Quill Diameter: 5.7" 144.78mm
Tailstock Quill Travel: Tailstock Quill Travel: 7.9" 200.66mm
Tailstock Quill Inner Taper: Tailstock Quill Inner Taper: MT #6 MT #6
Tailstock Bearing Surface of Bed Ways: Tailstock Bearing Surface of Bed Ways: 23.6" 599.44mm
Electricals: Electricals: 480V / 3 ph / 60 Hz 480V / 3 ph / 60 Hz

Equipped With

Headstock Clutch Headstock Clutch
Removable Gap Removable Gap
Hardened and Ground Single Piece Bed Casting Hardened and Ground Single Piece Bed Casting
Hardened and Ground Cross Slide Ways Hardened and Ground Cross Slide Ways
Universal Gearbox w/ Safety Clutch Universal Gearbox w/ Safety Clutch
4-Position Tool Post 4-Position Tool Post
2-Speed Hardened and Ground Tailstock Quill 2-Speed Hardened and Ground Tailstock Quill
Low Volt Controls Low Volt Controls
6-Way Rapid Traverse 6-Way Rapid Traverse
Flood Coolant System Flood Coolant System
Automatic Lubrication to Bed & Cross Slide Ways Automatic Lubrication to Bed & Cross Slide Ways
Electro-magnetic Spindle Break Electro-magnetic Spindle Break
Halogen Work Light Halogen Work Light
Thread Chasing Dial Thread Chasing Dial
Steady Rest w/ Roller Jaws Steady Rest w/ Roller Jaws

Dimensions and Weight

30000 Lbs 13605 Kg

This equipment is located in US