Cincinnati Milacron ARROW 750 Machining center - vertical

Listing description

CINCINNATI MILACRON ARROW 750 CNC Vertical Machining Center was produced in 1995. The machine has a table surface of 950 x 520 mm and a table load of up to 455 kg. The range of rotation of the CNC milling spindle is from 60 to 6000 rpm. The machine has 4 axes.

- CNC control: Fanuc Series O-M
- data transmission: RS232
- 4 axes
- working table surface: 950 x 520 mm
- table load, evenly distributed: 455 kg
- minimum spindle distance from table: 127 mm
- maximum spindle distance from table: 637 mm
- spindle rev range: 60-6000 rpm
- spindle taper: SK40
- X axis travel: 762 mm x 0.001 mm
- Y-axis travel: 510 mm x 0.001 mm
- Z axis travel: 510 mm x 0.001 mm
- A axis: 360 degrees x 0.001 degrees (divider)
- rapid feeds, working in the X axis: 12000 mm / min.
- rapid feeds, working in the Y axis: 12000 mm / min.
- rapid feeds, working in the Z axis: 10000 mm / min.
- number of tools in the magazine: 21 (16 active)
- maximum tool diameter with adjacent seats occupied: 80 mm
- maximum tool diameter with free adjacent seats: 160 mm
- maximum tool length: 305 mm
- maximum weight of the tool with the holder: 6.8 kg
- power supply: 3 x 400V
- rated machine power: 15.5 kVA
- maximum current at full load: 24 A
- compressed air pressure: 5.5 bar (consumption: 0.057 m3 / min.)
- continuous power: 3.7 kW
- power, 30 min: 5.5 kW
- machine dimensions (width x depth x height): 2.78 x 2.1 x 2.65 m
- weight 3300 kg
- DTR - technical and operational documentation

This equipment is located in PL