Cincinnati Milacron Powerline NT750 130

Listing description

Cincinnati Milacron Powerline NT750 130 (2005) Injection Molding Machine

Brand: Cincinnati Milacron
Model: Powerline NT750 130
All-Electric Machine
Year: 2005
Hours worked: 89973

This unit is equipped with SIDEWINDER Two-Stage Injection Unit
-Two Stage Injection units can work Independently or simultaneously
SIDEWINDER Two-Stage Injection Unit:
INCREASED CAPACITY. MAXIMUM VERSATILITY. HIGHEST MELT QUALITY.
That’s what you get with the SIDEWINDER Two-Stage Injection Unit. The unit is standard on POWERLINE 440 ton and higher tonnage machines—in 74, 98 and 135 oz. injection capacities. Offers very economical large-shot capability—with up to 30,000 psi pressure—again with superior melt quality. Plus precision mini-shot control down to 2% of barrel capacity. The two-stage unit also offers compounding, venting and many other advantages unique to free-standing
extruders.
- First-in, first-out melt handling.
- Quick, easy color change.
- Equipped for abrasive materials.
- Precision mini-shot control down to 2-3% of barrel capacity.
- All with high throughput and high pressure.
- Can be used for different colors or the same on each unit, for individual shots
Clamp Style: Toggle
Tonnage: 750 ton
Controller: XTREEM NT
Type(Electrical/ Hydraulic): Electrical
Injection capacity, max GPPS: 130 oz
Theoretical disp.: 243.1 in^3
Maximum Daylight: 78.74 inches
Max/Min Mold Height: 39.37 inches/15.75 inches
Max Mold weight: 26,700 lb
Max Clamp Stroke: 39.37 inches
Euromap Dry Cycle Time: <4.5sec
Platen Size: 57.1 inches x 60.0 inches
Tie Bar Spacing: 40.16 inches x 40.16 inches
Tie Rod Diameter: 7.09 inches
Ejector Stroke: 9.84 inches
Max Ejector Force: 16.9ton
Max Eject Speed: 8.9in/sec
Max injection speed: 14.75in/sec
Max pull back force: 25000l bf
Plunger stroke: 40.75 inches
Plunger diameter:2.76 inches
Extruder performance -70mm: 265rpm
Sled pulling force: 4.1 ton
Pneumatic needle valve: Yes
Air Blow: Yes
Heating Circuits Hot Runner: Yes
Electric Knockout: Yes
Hydraulic Core Pull: Yes
Types of products molded: Medical instruments
Machine Measurements:
Length: 424.1 inches
Width: 109.0 inches
Height: 105.1 inches
Centerline Height: 58.0 inches
Weight: 91,000 lbs
Electrical Specifications:
Input Power Source: Std 230 VAC ±10% 3 Ph 60 Hz
Power Supply Capacity: 190kVA
Power specification 480V
Machine Requirements:
Water: 6gpm @ 50psi
Air: 80psi @ 20cfm

This equipment is located in US