Cinetic Landis Viking Super Se

Listing description

SPECIFICATIONS:
Grinding Wheel Diameter - Maximum................................18" (457 mm)
Grinding Wheel Hole Size..........................................8" (203 mm)
Regulating Wheel Diameter - Maximum..............................14" (355 mm)
Regulating Wheel Hole Size........................................7" (178 mm)
Work Diameter........................................0.05" - 2.5" (1 - 60 mm)
Grinding Wheel Width.............................................10" (254 mm)
Regulating Wheel Width...........................................11" (280 mm)
Main Drive Horsepower...........................................40 HP (30 kW)
Surface Speed (Variable Frequency Drive Unit)...........8,500 SFPM (45 m/Sec)
Regulating Wheel Speeds..........................................10 - 600 RPM
Approximate Weight......................................20,000 Lbs. (9072 kg)

FEATURES/BENEFITS:
- Machine Base:
Nodular Cast Iron
Composite Filled
- Lower and Upper Slide:
Advanced "Clampless" Design
Low Friction Plain Way System
Precision Backlash-Free Pre-Loaded Heavy-Duty 2.5" Diameter Ballscrew
Brushless Servo Motor
Linear Scale Feedback
Two-Way Compensastion and 0.1 Micron Resolution
- Grinding Wheel Spindle:
Removable Double Ended Twin Grip Style
Anti-Friction Roller Bearing
- Regulating Wheel Spindle and Housing:
Removable Double Ended Twin Grip Style
Anti-Friction Roller Bearing
Plus or Minus 6 Degree Feed Angle Range
- Regulating Wheel Drive:
Variable Speed (10 - 600 RPM)
Brushless Servo Motor
RPM Selectable
- CNC Grinding Wheel and Regulating Wheel Dresser:
Two-Axis "Camless" Contouring Truing Attachment
Anti-Friction Traverse & Plain Way Diamond Slide System w/Precision Ballscrews
Selectable Rate Servomotor Drive with Encoder Feedback for the Traverse Axis
Servomotor with Linear Scale Feedback for the Diamond Axis
0.1 Micron Resolution for both Axes.
- Additional Features:
Effective Mist Containment
Superb Accuracy
Part Tolerances to 0.000 0006" (0.15 micron)

EQUIPPED WITH:
- Machine Control:
Landis 6400 CNC Open Architecture Control System
Machine Control Logic Executed by ISaGRAF IEC-1131 Soft PLC
Grinding Software
Sercos Fiber Optic Interface
Microsoft Windows Operating System
- Operator Control:
CNC Servo Driven Diamond Wheel Dressing on Grinding Wheel
CNC Servo Driven Single Point Wheel Dressing on Regulating Wheel
Displays Part Programs
Displays Cycle Progression
Diagnostic Display
Soft Buttons for Manual Control
Hand Wheel for the Operator Control Station
- Thrufeed Workrest:
Capable of Handling a 10" Wide Grinding Wheel & 11" Wide Regulating Wheel
- (30) Degree Tungsten Carbide Tip Thrufeed Workrest Blade:
Designed to Cover a Part Range from 0.433" to 0.748"
The Blade Length is Designed for the Shuttle Fixture
- Wheel Scrubber System:
Hydraulic Systems P/N 213981 Hi-Pressure Coolant Pumping & Filtration System
with manifold and Rosendale Filter
High Pressure Overlapping Nozzles within the Grinding Wheelguard provide
continuous Spray to Grinding Wheel O.D. Switchable On/Off Selector
(3) New in Box, Norton (UPC/CUP:7958721212 Diamond Grinding Wheel
18" x 10" x 8" MC300731
- Automatic Fixture to Shuttle Parts During Grinding Cycle:
Parts are Manually Loaded into the "Carrier" via the Workrest Blade where the
Parts will be Captured. All Fixture Positions and Feed Cycle Definition can be
Entered into the Appropriate Screen for Both the Rough Grinding Cycle and the
Finish Grinding Cycles
- Manuals: Via CD ROM Media

*Preliminary Specifications Subject to Verification.

This equipment is located in US