Citizen K16 VIP Swiss type lathe

Listing description

Single-spindle lathe

1) machine information

Max machining diameter: 16 mm
Max processing length: 200 mm
Motor power: 3.7 kW
Spindle speed: 15,000 rpm
Index C of the spindle: 0.001°.

Pick-up spindle
Max machining diameter: 16 mm
Max processing length: 80 mm
Motor power: 1.1 kW
Spindle speed: 10,000 rpm
Index C of the spindle: 0.001°.

Motorized tools on vertical support
Speed: 6,000 rpm
Motor power: 0.4 kW
Number of tools: 4

Tooling system
Turning tools: 5
Drilling tools (front): 4
Drilling tools (rear): 4
Toolholders, sleeves (diameter): 20 mm
Toolholders, turning steels (shank section): 12 mm

2) bar feeder information: minimag FMB 18

Material passage in the guide channel: from 2 to 13 (16) mm - (maximum diameter of the feeding bar: 18 mm)
Power requirement: 1.5 kW
Maximum feed force: 300 N (infinitely adjustable)
Insertion speed: 0 to 300 mm / s (adjustable)
Return speed: max 600 mm / s
Load capacity: 180 (e.g. 90 bar, Ø2 mm)
Remaining workpiece length: max. 420 mm
Dimensions (L x W x H) 5,000 x 420 x 1,060 mm
Weight approx. 550 kg
Filling time: approx. 22 s
Oil filling: 50 L (viscosity: 100 cSt at +40 ° C)
Operating voltage: 3 x 400 V / 50 Hz
Control voltage: 24 V DC
Compressed air connection: min 0.6 MPA / max 1 MPa
Air consumption: approx. 3 liters per charge
approx. 0.3 liters per double bevel stroke
Noise emission: max. 48 ± 5 dBA (during bar change)

This equipment is located in ES