Davis Standard 60In60 / Mv-35In35 Co-Extrusion Line

Listing description

Sheet Width: Sheet Width: 78" 1981.20mm
Davis Standard 60IN60TPIH Extruder Davis Standard 60IN60TPIH Extruder  
Screw Diameter: Screw Diameter: 6" 152.40mm
L/D Ratio: L/D Ratio: 30:1 30:1
Screw Rotation Speed: Screw Rotation Speed: 100 RPM 100 RPM
Drive: Drive: 400 HP DC 298.28 kw DC
• Fanuc 90-30 PLC • Fanuc 90-30 PLC  
• Top Vented Barrel • Top Vented Barrel  
• Eurotherm Digital Controllers • Eurotherm Digital Controllers  
• Electrically Heated & Water Cooled • Electrically Heated & Water Cooled  
• Unitized Control Panel w/ 6 Barrel Zones & 15 Downstream Zones • Unitized Control Panel w/ 6 Barrel Zones & 15 Downstream Zones  
• Extek 6" Hydraulically Operated Slide Plate Screen Changer • Extek 6" Hydraulically Operated Slide Plate Screen Changer  
• LCI ES 90/90 Melt Pump • LCI ES 90/90 Melt Pump  
• Wintek DVT Vacuum System • Wintek DVT Vacuum System  
• Die Block • Die Block  
Davis Standard MV-35IN35 Extruder Davis Standard MV-35IN35 Extruder  
Screw Diameter: Screw Diameter: 3.5" 88.90mm
L/D Ratio: L/D Ratio: 30:1 30:1
Screw Rotation Speed: Screw Rotation Speed: 100 RPM 100 RPM
Drive: Drive: 150 HP DC 111.86 kw DC
• Fanuc 90-30 PLC • Fanuc 90-30 PLC  
• Side Vented Barrel • Side Vented Barrel  
• Electrically Heated & Water Cooled • Electrically Heated & Water Cooled  
• Unitized Control Panel • Unitized Control Panel  
• Eurotherm Temperature Controllers • Eurotherm Temperature Controllers  
• (5) Barrel Zones & (6) Downstream Zones • (5) Barrel Zones & (6) Downstream Zones  
• Extek 3.5" Hydraulic Slide Plate Screen Changer • Extek 3.5" Hydraulic Slide Plate Screen Changer  
*Both Extruders Connect Thru Die Block to 84" Wide Restrictor Bar Die & Manual Deckling Option *Both Extruders Connect Thru Die Block to 84" Wide Restrictor Bar Die & Manual Deckling Option  
Davis Standard 24" x 78" 3-Roll Chrome Downstack Operation Davis Standard 24" x 78" 3-Roll Chrome Downstack Operation  
Drive: Drive: 7.5 HP 5.59 kw
• Eurotherm Temperature Controllers • Eurotherm Temperature Controllers  
• Water-Cooled Rolls • Water-Cooled Rolls  
• Hydraulic Roll Adjustment • Hydraulic Roll Adjustment  
• 8" x 78" Single Drive Pull Roll Stand • 8" x 78" Single Drive Pull Roll Stand  
• Conveying Section w/ NGR Scanning Device • Conveying Section w/ NGR Scanning Device  
Davis Standard / Famco P-1496WG Shear Davis Standard / Famco P-1496WG Shear  
Plastic Capacity: Plastic Capacity: 0.25" 6.35mm
Motor: Motor: 5 HP 3.73 kw
• Vulcan Sheet Stacker • Vulcan Sheet Stacker  
• (2) 36" W x 72" L Conveyor Belts • (2) 36" W x 72" L Conveyor Belts  
• Power Take Off Table • Power Take Off Table  

Equipped With

Davis Standard 60IN60 Extruder Davis Standard 60IN60 Extruder
Davis Standard MV-35IN35 Extruder Davis Standard MV-35IN35 Extruder
Davis Standard EX-M-PLAR Sheet Stacker Davis Standard EX-M-PLAR Sheet Stacker
Davis Standard / Famco P-1496WG Shear w/ Power Take Off Table Davis Standard / Famco P-1496WG Shear w/ Power Take Off Table

This equipment is located in US