-
Machinery
Choose from 20,248 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
Specifications
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
Travel
X-axis travel mm (in): 560 (22)
Y-axis travel mm (in): 560 (22)
Z-axis travel mm (in): 660 (26)
Distance from pallet surface to spindle center mm (in): 80-640 (3.1-25.2) [T-slot: 60-620 (2.4-24.4)]
Distance from pallet center to spindle gauge plane mm (in): 70-730 (2.8-28.7)
Pallet
Distance from floor surface to pallet surface mm (in): 1,050 (41.3) [T-slot: 1,070 (42.1)]
Pallet working surface mm (in): 400x400 (15.7x15.7)
Pallet loading capacity kg (lb): 400 (880)
Max workpiece swing diameter mm (in): 630 (24.8)
Max workpiece height mm (in): Tap pallet: 900 (35.4) [T-slot pallet: 880 (34.6)]
Minimum pallet indexing angle: 0.001 degree
Pallet indexing time
Spindle
Max spindle speed: 15,000
Number of spindle speed ranges: 1
Type of spindle taper hole: CAT 40
Spindle bearing inner diameter mm (in): 80 (3.1)
Feedrate
Rapid traverse rate mm/min (ipm): X, Y, Z: 60,000 (2,362.2) [96,000 (3,779.5)]
Feedrate mm/min (ipm): 0-60,000 (0-2,362.2) {when using high precision control
Job feedrate mm/min (ipm): 0-5,000 (0-197) <20 steps>
ATC
Type of tool shank: CAT40
Tool storage capacity: Chain-type: 120
Max tool diameter
Max tool diameter
Max tool length mm (in): 450 (17.7)
Max tool mass kg (lb): 12 (26.4)
Max tool mass moment
Method of tool selection: Fixed address, shorter route access: 120 tools
Tool changing time
APC
Number of pallets: 5
Method of pallet change: Turn-type
Pallet changing time s: 8
Power Sources
Electrical power supply kVA: 39
Compressed air supply MPa (psi), L/min (gpm): 0.5 (72.5), 420 (110.9) {when the tool tip air blow is regularly used, air supply of more than 300 L/min (79.2 gpm) is separately required}
Tank Capacity
Coolant tank capacity L(gal): 800 (211.2)
Machine Size
Approx length x width: 236 x 132 inches
Mass of machine
Highlights
· Direct scale feedback X, Y, Z
· High performance rear discharge external chip conveyor
· High pressure thru spindle (chip blaster)
· 21.5" ErgoLine (celos) control panel with multi touch monitor
· Renishaw CMP60
· Tool probe
· Memory 6GB
· Highspeed mode
· Inverse time options
· (4) tombstones
· Can be inspected under power
· Control: Mitsubishi CNC M700BM/M700UM series
· All available manuals included
This equipment is located in US
Manufacturer | Dmg Mori |
Model | NHX 4000 Gen 2 |
Year | 2015 |
Country | USA |
Condition | Good |
Main category | Metalworking Machinery |
Subcategory | Horizontal Machining Centre |
ID | P00504265 |
Client type | Machinery dealer |
On Kitmondo since | 2014 |
Number of listings | 0 |
Country | USA |
Employees | 1 - 10 |
Established | 1992 |
Last activity | April 23, 2021 |