DROSS PRESS - 1.3X1.0X0.5 M - 1.4 T - 0.3M³

Listing description

1 Second-hand dross press
The Press works through two pressing cylinders fed by a hydraulic unit using water glycol as hydraulic fluid.

The Electric board has the PLC which controls the press.

The electric power installed is about 16 kW
The press works with specially designed skim pots and separate sow molds (panset) for aluminium recovery. The skim pots and sow molds are made from special steel alloy and they are easy to handle with fork trucks.

Dimensions 1300 x 1000 x 500 mm – W x D x H Capacity
Material S275 JR Weight
Sow moulds
Dimensions 1080 x 640 x 260 mm – W x D x H Capacity
Material S275 JR Weight
Press head
Dimensions 1300 x 1000 x 500 mm – W x D x H Capacity
Material S275 JR

Hydraulic unit
Vane pumps with bells and elastic joints for the connection to the electric motors

Suction filters with taps Oil filters
Oil/water heat exchanger Check valves
Overpressure valves Thermostatic valves
Cooling water filters Accumulator
Unidirectional restrictor Drain taps
Electrical-driven distributor for power lifting cylinders, complete with reducer, safetyand proportional

Vane pumps with electric motors for the door lifting Oil conditioning pumps

Solenoid valves for the door control Oil tank

Hydraulic Box Type CNT-1174-00-0 Quantity Pump
Capacity Pump 75+38 cc/rev Motor power
Solenoid voltage 24 VDC Capacity Tank
Pressure Max. 80+160 bar Oil

This equipment is located in DE