Dugard Eagle 660 Machining center - vertical

Listing description

The DUGARD EAGLE 660 milling center was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper.

Technical parameters of the DUGARD EAGLE 660 CNC milling machine

Worktable :
- table dimensions: 810 x 510 mm
- maximum table load: 500 kg
- T-slot, quantity: 5 mm
- T-slot, size: 18 mm
- T-slot, spacing: 100 mm

Processing field:
- X axis travels: 660 mm
- Y axis travels: 530 mm
- Z axis travel: 510 mm
- distance of the spindle tip to the table axis: 150 ~ 660 mm
- distance of the spindle axis to the column: 585 mm

Spindle:
- spindle taper: ISO 40
- constant spindle power: 11 kW
- spindle power 30 min. : 15 kW
- spindle speed range: 80 ~ 8000 rpm.

Rapid feeds:
- X axis travel: 30 m / min.
- Y axis travel: 30 m / min.
- Z axis travel: 24 m / min.
- working feed rate X, Y, Z: 1 ~ 10000 mm / min.
- X, Y, Z axis guides: rolling blocks

Accuracy:
- positioning accuracy (according to JIS B6338): 0.004 / 300 mm
- repeatability (according to JIS B6338): 0.003 mm

Tool magazine:
- number of tools in the magazine: 24
- tool holder type: BT40
- type of magazine: with intermediate claw
- maximum tool diameter: 76 mm
- maximum tool length: 250 mm
- maximum tool weight: 7 kg
- tool change time (T-T, C-C): 3.0-4.5 s

Other data of the CNC machine DUGARD EAGLE 660:
- power demand: 15 kVA
- compressed air demand: 5 bar, 200 l / min.
- required area for the machine (length x width x height): 2 x 2.06 x 2.58 m
- machine weight: 5000 kg

This equipment is located in PL