Eisen PA4560, Gap Bed

Listing description

SPECIFICATIONS:
Center
Center Height..................................................22.63" (575mm)
Swing Over Bed................................................44.68" (1135mm)
Swing Over Cross Slide.........................................34.44" (875mm)
Swing Over Gap................................................62.99" (1600mm)
Gap Width from Headstock.......................................23.62" (600mm)
Distance between Centers.........................................60" (1500mm)

Bed
Width without Auxiliary Guide..................................22.04" (560mm)
Width with Auxiliary Guide.....................................25.98" (660mm)

Carriage
Cross Slide Travel.............................................26.37" (670mm)
Compound Rest Travel...........................................17.71" (450mm)
4-Way Tool Post Width...........................................8.07" (205mm)

Thread Feeds Range
Longitudinal Feed........................0.0018"/0.1 Rev. (0.045mm/2.55 Rev.)
Cross Feed..............................0.0009"/0.05 Rev. (0.023mm/1.25 Rev.)
Longitudinal Rapid Feed.............................78.74"/Min. (2000mm/Min.)
Cross Rapid Feed.......................................50"/Min. (1270mm/Min.)
Metric Thread...............................................60 Kinds (1~56mm)
Inch Thread.............................................60 Kinds (1/2~28 TPI)
Module Thread..........................................60 Kinds (0.25~14 MOD)
Diametral Pitch Thread....................................60 Kinds (2~112 DP)
Pinch of Leadscrew...............................................2 TPI (12mm)

Headstock (18) Steps Manual
Spindle Nose............................................................A2-11
Spindle Bore.......................................................6" (154mm)
Spindle Speed Step (RPM/Minute)........7, 10, 13, 17, 22, 30, 45, 60, 75, 90,

105, 125, 190, 280, 355, 410, 540, 700

Tailstock
Quill Diameter..................................................4.52" (115mm)
Quill Travel....................................................7.87" (200mm)
Inner Taper of Quill....................................................MT #6
Bearing Surface on Bed Ways....................................19.68" (500mm)

Support Capacity
Capacity......................................................6" Spindle Bore
Load between Centers w/o Steady Rest.....................7,700 Lbs. (3500kgs)
Clamp Capacity Steel Body 4-Jaw Chuck........@ 20" off face of chuck 5060 Lbs

Motor
Main Spindle Motor..............................................30 HP (22 KW)
Coolant Pump Motor..........................................0.125 HP (0.1 KW)

Dimensions & Weight
Catalog Dimensions.............................3750mm L x 1800mm W x 1325mm H
Catalog Weight....................................................22,000 Lbs.

*Preliminary Specifications Subject to Verification.

This equipment is located in US