ERSA Powerflow N2 XL Wave Solder Machine (2011)

Listing description

ERSA Powerflow N2 XL Wave Solder Machine (2011)

Brand: Ersa
Model : Powerflow N2 XL
Serial #: W039A-11K0015
Year: 2011
Type : Wave Solder Machine
Voltage: 400V
Power Supply: 3 Phase
Exhaust: 800/ 2 x 200m³
Weight: Approx. 3,200 kg
CE

Machine Specifications:

Dimensions (3 preheating modules):
Length: 5,700 mm (6,425 mm incl. conveyor)
Width: 1,400 mm / 1,513 mm*
Height: 1,580 mm
Weight: approx. 2,800 kg / approx. 2,850 kg*

Dimensions (4 preheating modules):
Length: 6,450 mm (7,175 mm incl. conveyor)
Width: 1,400 mm / 1,513 mm*
Height: 1,580 mm

Pneumatic system:
Pressure monitoring air pressure: min. 6 bar
Air consumption: approx. 5 - 10 m³/h

Inert Gas:
Pressure monitoring inert gas supply: 8 bar
Recommended inert gas class: 99,999 %
N2 consumption: approx. 25 m³/h

Extraction:
Exhaust connections:1 x 800 m³/h and 2 x 200 m³/h

Electrical Data:
Voltage: 3 x 230/400 V, N, PE, 5-wire-system
Power tolerance range: ± 10 %
Frequency: 50 / 60 Hz

Flux module:
Flux storage tank: 10 l
Spray pressure: 0.9 - 2.5 bar
Flux system: 1-axis-system with CAN motor
Bottom-side preheat module:
Type: dynamic short-wave emitter
Capacity: max. 10.4 kW (controlled)
Dimensions: length 600 mm / width 720 mm
Type: medium-wave emitter
Capacity: max. 6 kW (closed loop controlled)
Dimensions: length 600 mm / width 720 mm
Type: convection heater
Capacity: max. 10.2 kW (closed loop controlled)
Dimensions: length 600 mm / width 720 mm

Top-side preheat module:
Type: convection heater
Capacity: max. 6 kW (closed loop controlled)
Dimensions: length 600 mm / width 720 mm
Max. preheating length:
Standard: 1.8 m
Option: 2.4 m

Solder module:
Capacity: approx. 9.2 kW
Solder volume: approx. 525 kg / 600 kg*
(when using lead-free alloys)
approx. 630 kg / approx. 725 kg*
(when using SnPb37 EQ),
Warm-up time: approx. 3.5 h / approx. 4 h* (260 °C)
Solder temperature: max. 300 °C
Automatic solder bar feeder

Conveyor system:
Type: Finger-type Conveyor, Frame Conveyor, Conveyor width
finger-type conveyor: 60 - 406 mm / 60 - 508 mm*
Frame conveyor 330/400 mm / 500 mm*
PCB length: Min 120mm - Max 600 mm
PCB top-side clearance: max. 80 mm
Conveyor speed: 0,5 - 2,5 m/min
Conveyor angle: 7° (fixed angle)

This equipment is located in US