EWD HD 30 SV

Listing description

EWD ESTERER HD_30 SV
Heavy duty gate in TOP CONDITION!
Repaired in 2009, with warranty

Item 1
Frame width 750 mm
Passage height max. 750 mm
Stroke 600 mm
Speed ​​max. (even at idle) 300 U / min.
Number of rollers 4 pcs.
Feed rate 0 - 12 m / min
Operating side, seen in the cutting direction: right
Print register.
Machine base and base plate in torsion resistant
Cast construction.
Gatter rollers are shared for easy exchange,
hydraulic lifting and lowering of the upper
Gatter rollers, adjustable roller pressure.
Electric feed, for stepless regulation
the feed rate.
Central lubrication for all Rahmenfuehrungen.
Upper guide executed with water cooling,
with water tank.
Flywheel with grease-lubricated roller bearings,
Flywheel hubs made of high-quality Sphaeroguss,
Flywheel and flywheel hubs in the press fit.
Fixed and empty disk for Einrueckbetrieb.
Slide slide with electric drive (0.55 kW).
with gated enclosure (saw tensioner, saw blades etc.)
with gate main drive 55 kW (countershaft, engine, etc.)

Pos. 2
KU-AGG cooling unit
for water cooling of the upper frame guides,
with radiator, expansion vessel, piping and fittings.

Pos. 3
HY-AGG hydraulic unit
to supply the gate functions.
Tank with level monitoring and heating element, with oil filling.

Pos. 4
LT Electric control âEUR power unit
to our delivery, consisting of:
Control cabinet and control panel
Housing made of sheet steel, protection class IP55.
Switchgear manufactured by Kloeckner - Moeller.
with switching device for main motor.
In the control panel or in the control cabinet are the
Connections wired to terminal strips.
Protective measure according to VDE: zeroing.

Pos. 5
ARTA_C splitting wedge device with warranty.
For attachment to the gate outlet side.
Splitting wedges electrically adjustable 2 pcs.
Splitting wedge opening 60 to 530 mm
Press rollers electrically driven 2 pcs.
Weight load of the rollers.

This equipment is located in AT