FILL ME

Listing description

SPECIFICATIONS:
Keyway Cutting Capacity:
- Width.....................................................0.079" - 2.755"
- Length - Maximum..................................................27.560"
Bore Diameter to DIN 6885...................................0.394 - 17.323"
Table:
- T-Slotted.......................................................35" x 45"
- 4-Jaw Rotary (Sits on T-Slotted Table).......................23.622" Dia.
- Part Capacity on T-Slotted Table..............................44,000 Lbs.
Speeds:
- In-Feed - Infinitely Variable...........................0.0004" - 0.0193"
- Cutting - Continuously Variable................................0 - 82 FPM
- Return - Constant...........................................Up To 148 FPM
Power:
- Cutting.........................................................4,721 LbF
- Lifting.........................................................7,868 LbF
- Motor...............................................................10 HP
Electrics..............................................480V/3Ph/60Hz/63Amps
EQUIPPED WITH:
Siemens Simatic Touch Panel Control
Servo Driven Indexing Rotary Table
Hydraulic System w/Chiller
Coolant Filtration System w/Chip Conveyor
Mezzanine Work Area w/Stairs & Rails
Splash Guards
Industrial Magnetics Dual Magnet Bar Manipulator
Tooling:
TWC7 Cutter Guide Bar Diameter ~22mm
- Guide Bar w/Table Insert Bush ~30"L
- Feed Bar ~51"L
- (2) Cutter Holders ~43"L
- Clamping Piece
TWC7 Cutter Guide Bar Diameter ~28mm
- Guide Bar w/Table Insert Bush ~35"L
- Feed Bar ~53"L
- Cutter Holder ~48"L
- Clamping Piece
TWC7 Cutter Guide Bar Diameter ~35mm
- Guide Bar w/Table Insert Bush ~41"L
- Feed Bar ~51"L
- Cutter Holder ~47"L
- Clamping Piece
TWC9 Cutter Guide Bar Diameter ~47mm
- Guide Bar w/Table Insert Bush ~47"L
- (2) Feed Bars ~53"L
- (2) Cutter Holders ~49"L
- Clamping Piece
TWC9 Cutter Guide Bar Diameter ~51mm
- (2) Guide Bars w/Table Insert Bush ~44"L
- Cutter Holder ~43"L
- Cutter Holder ~48"L
- (2) Clamping Pieces
TWC10 Cutter Guide Bar Diameter ~70mm
- (2) Guide Bar w/Table Insert Bush ~51"L
- Feed Bar ~55"L
- (2) Cutter Holders ~51"L
- (2) Clamping Pieces
4-Jaw Table Insert Plates ~300mm OD
- ~55mm ID
- ~110mm ID
- ~175mm ID
- ~245mm ID
Set of (3) Reversible Top Jaws
*Preliminary Specification Subject to Verification
Share
Tweet
Share
0Shares

This equipment is located in US