Fill Saw line

Listing description

Description ROBOT SAWING LINE - PROFILES - 7200 MM

Year 2007
Brand FILL GMBH
Qty.1 Second-hand robot sawing line
Mfc. Fill Gesellschaft m.b.H. Built
Sub-suppliers Pneumatic – Festo, Bosch Hydraulic – Bosch
Gear motors, Servo motors, Control units – SEW & Siemens Robot - Kuka
Saw motors – Perske Lubrication unit – Vogel Vibrating channels – Jöst
Control system 840D – Siemens
Basic data of the designed sawing line
Different cutting sequences 90° - Chop cuttings Cuts with parallel miter
Cuts with opposite miter Cuts with turned profiles – 3D-Layer cuts – left & right parts
Saw blade change approx. 5 min.
Loose chips are blown out of the sawn profiles via nozzles and air curtains in automatic mode.
Profile definition Profile length max. 7200 mm
Finished length up to 1750 mm at double miter 80-2500 mm at chop cuttings
Angles 0° - 60° Profile height
Frame & Layer dimensions In the frame 1200 mm to the saw
Stack in defined stacking boxes Separate layers or reduced width to saw
Short & long length Short length 80 – 499 mm transverse transport for destacking
Up to 500 mm Along then cross transport
Clamping rest Max. length 175 mm to aim for 150 mm
Transverse transport - Short profiles are advanced by the following material
- In this case, the transverse transport is arranged movable, so that there is enough free space for sawing available
Permanently sound pressure level approx. 80 dB(A) - measured in front of the saw line

Consist of Profile frame – Pad position 3 with roller table Unstacking station
Rubber band conveyor Laying provision Profile single turntable 90°
Camera detection – profile frontally Saw base frame
Saw aggregate with 3 NC-linear & 1 Rotation-NC-Axis
NC-Inserter and roller table Transportation unit packing station 1
Spray mist lubrication Hydraulic aggregate
Chip conveyor in the longitudinal direction Central lubrication unit
Conveyor technology transport Conveyor technology cross transport packing station 2
Stacking robot with suction gripper - packing station 1 & 2
Turning station for layers in the longitudinal direction Color Coding System
Turntable with adapter holder for finished part boxes Recording the stacking units
Cardboard strip magazine for liners Suction filter - minimal quantity lubrication
Safety system NC Basic control Sinumerik 840D Data collection

This equipment is located in DE