-
Machinery
Choose from 20,418 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
GABBIANI SI-V112 - PANELMATIC2
Calibrating and/or squaring line with edge banding doing panels all round in 2 passes
Panel width min/max: 220 / 1000 mm
Panel length min/max: 320 / 3200 mm
Edges max. 3 x 45 mm.
Fixed side at the left
Siemens SMSPC controls
Line set up:
Vacuum feeder
Turning station length to cross
Double end tenoner
Turning station length to cross
Double squaring and edgebanding
Turning station cross to length
Vacuum stacker
1.01 FEEDER, type CAR MS 2000
2-lane
1.02 TURNING STATION LENGTH-CROSS, type TR 100
90° turning of workpieces by means of 2 clamping discs
1.03 DOUBLE END TENONER, type SI_V 112 - schéma 4500
Squaring panels or calibrating/shaping solid wood panels
Panel feed by chains, chain width 80 mm
Max. pass in thickness 150 mm
Feed speed 7 to 36 m/min
Equipment:
1+1 Jump scorer, motor 1,4 kW (max. panel thickness 80 mm)
1+1 Hogger, motor 7,35 kW
1+1 Jump shaper, motor 7,35 kW
1+1 Shaper, motor 7,35 kW
1+1 Shaper rounding the leading panel corner on solid wood panels (radius max. 40 mm, panel thickness max 50 mm)
1+1 Shaper rounding the leading panel corner on solid wood panels (radius max. 40 mm, panel thickness max 50 mm)
1.04 TURNING STATION LENGTH-CROSS, type TR 100
90° turning of workpieces by means of 2 clamping discs
1.05 Double sided squaring and edge banding machine, type PANELMATIC 2 - schéma G9i - 10530 mm
1st and 2nd pass machine
Infeed chain with 1300 mm length in order to take 1220 mm panels
Panel alignment at the infeed
Roller chain with bearings
Automatic pop-up dogs with 540 mm centers
Max. panel thickness 60 mm
Equipment:
1+1 Jump scorer, motor 1,4 kW
1+1 Hogger, motor 7,35 kW
1+1 Jump shaper 7,35 kW
1+1 Jump shaper 7,35 kW
1+1 Hot melt glue application by roller with pre-melting, unit tilting 0 - 4 °
1+1 Twin coil edge magazine, edges max. 3 x 45 mm
1+1 Pressure zone with 1 driven, 4 loose pressure rollers, unit tilting 0 - 4°
1+1 End trims, motors 2 x 0,88 kW
1+1 Rough trimming, motors 2 x 0,88 kW, vertical tracers
1+1 Fine/Radius trimming, motors 2 x 0,33 kW, vertical and lateral tracers
1+1 Universal shaper, motor 4 kW, with tracer
1+1 Universal shaper, motor 4 kW, with tracer
1+1 Universal shaper, motor 4 kW, with tracer
1+1 Oscillating buffing 2 x 0,24 kW
1.06 TURNING STATION CROSS TO LENGTH, type TR-001
1.07 Stacker, type CAR/S MS 2000
2-lane
This equipment is located in BE
Manufacturer | Gabbiani |
Model | SI-V112 - PANELMATIC2 |
Year | 2002 |
Country | Belgium |
Condition | Good |
Main category | Woodworking |
Subcategory | Wood machining center |
ID | P90813208 |
Client type | Machinery dealer |
On Kitmondo since | 2011 |
Number of listings | 73 |
Country | Belgium |
Employees | 1 - 10 |
Established | 1989 |
Last activity | March 21, 2024 |