WIEGAND Evaporation Plant
Two - effect, continuously operating directly heated WIEGAND vacuum circulation evaporation plant.
Usage: The device is almost new and only once launched
Model Number: WIEGAND 3640-75-99.02
Material: Stainless Steel
Voltage: 220/380 V, 50Hz
Made by: GEA WIEGAND, GERMANY
Forced circulation evaporator is suitable for the fouling resistance,
Distillation ,crystallization, thermal sensitive (low temperature), high concentration, high viscosity and insoluble solids such as chemical industry, food, pharmaceutical, environmental protection engineering, waste liquid evaporation recycling industries of evaporation concentration. Food Processing, Fish press water, animal feed, ….
Flow sheet & Arrangement layout drawing: exists
the 2-effect vacuum circulation evaporation plant is design for continues operation, in special design for stick water.
the plant is heated by live steam; the steam pressure can be adjusted via a valve.
the vacuum in the plant is generated by mechanical vacuum pump.
A mixing condenser is used to condense the remaining vapours .
For the feed and discharge of product, condensate, and cooling water centrifugal pumps are used
Capacity and 0peration data:
Feed - quantity 1600 kg/hr.
- Temperature approx. 70 °C
- Concentration 10% TS
Evaporation rate 1200kg/hr.
Concentrate: - quantity 400 kg/hr.
- Temperature approx. 50 °C
- Concentration 35-40% TS
Effect 1 effect 2
Heating steam temperature, °C 110 90
Vapour temperature, C 90 90
Product boiling temperature, °C 90 50
Heating steam (5 bar) = 650 kg /hr. for evaporation and preheating
Cooling water = 40 m³/hr.
seal water for pumps = approx. 1 m³/hr.
Installed electrical power = approx..22KW