GFM SX-16 CNC Radial Forging

Listing description

GFM SX-16 CNC Radial Forging

Manufacturer:GFM
Attachments:Overhaul GFM SX-16.pdf,Specs GFM SX-16.pdf,
Manufacturer: GFM (Austria)
Model: SX-16
YOM: 1974 / 2020
PLC: Siemens S7 - Technology v4.2 with CNC Bosch Rexroth XM21
Numbers of Hammers: 4
Forging force: 800 Ton (200 t per Hammer)
Strokes per minute: 580
Hammer length: 320 mm
Maximum setting range is calculated diameter hammers – 100 mm
Maximum diameter of forging for structural steel:
circular cross section – Ø 160 mm
square cross section – 130 mm
Extreme quadrangle: 12 x 120 mm
Maximum length of forging: 6000 mm
Maximum diameter mounting the manipulator: 160 mm
Feed of manipulator A: 6800 mm
Feed of manipulator B: 7200 mm
Manipulators speed in fast moving: 400 mm/s
Feed speed of manipulators (steeples regulation): 10 ÷ 115 mm/s
Cooling water pressure: 3 ÷ 5 bar
Temperature of inlet water: max. 30?C
Cooling water consumption: 34m3/h
Pipe diameter for cooling water: 2”
Compressed air pressure: min. 5 bar
Pipe diameter for compressed air: Ø 20 mm
Consumption of compressed air: 1,5 Nm3/h
Power supply (nominal power): 350 kW
Motor voltage: 500 V
Control voltage 220 V
Main engine Power: 200 kW
Power pump motors: 185 kW
Power manipulators motors: 2 x 22 kW

Dimensions of the machine:
Axis height of forging above the hall level: 750 mm
Maximum height of machine above the hall level: 2.050 mm
Maximum length of machine at the hall level: 33.740 mm
Foundation length: 34.200 mm

This equipment is located in PL