GLEASON 104 Coniflex Straight Bevel Gear Generator

Listing description

GLEASON
104 Straight Bevel Coniflex Gear Generator
New 1960’s
 Country of Origin: USA

3 pairs of Cutter Bodies, equipped with completing cam.
(1) Set-Up of Change Gears For Speed, Feed and Roll, Index and Ratio Roll
Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut)
Self-Contained Hydraulic System
Self-Contained Coolant System
Workhead Brake
Full Guards Cover
Full Compliment of Electrics (Motor/Controls)
Stock no 3716
GLEASON
104 Straight Bevel Coniflex Gear Generator
New 1960’s
 Country of Origin: USA
Serial Number
615810
Equipped
with Completing Cam
3 pairs
of Cutter Bodies
(1) Set-Up of Change Gears For Speed, Feed and Roll, Index and Ratio Roll
Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut)
Self-Contained Hydraulic System
Self-Contained Coolant System
Workhead Brake
Full Guards Cover
Full Compliment of Electrics (Motor/Controls)
SPECIFICATIONS:

Cone Distance: 0
to 4-1/2″ ( 0 to 108 mm)
Pitch Angle shafts at 90° : 84°.
18´ min. (max); 5°. 42´ min. (min)
Extreme Ratio: 10-to-1
Pitch Diameter: 10-to-1
ratio; 8½” (max) (216 MM)
Pitch Diameter: 1-to-1 ratio; 6″
(max) (152 mm)
Diametral Pitch (coarsest): 3
DP (8.5 module)
Diametral Pitch (finest): 20
DP (1.3 module)
Face Width: 1-3/8″
(max) (35 mm)
Index Range: 9
to 93 inclusive, and most numbers up to 175
Pressure Angles: 20°,
22½° & 25°.
Diameter of Taper Hole at Large : 3-29/32″
(100 mm)
Taper per Foot: 39/64″ (15 mm)
Depth of Taper: 6″ (152 mm)
Diameter of Hole Through: 2-7/16″ (62 mm)
Spindle Nose to Machine Center: 1-1/2″
to 9″ (38 to 229 mm)
Cutter Speeds: 98
to 286 (feet per minute) (30 to 87 m/min)
Feeds: 4.2
to 69.2 (seconds per tooth)
Main Motor: 5
HP 1800 rpm
Hydraulic
Pump Motor: ¾ HP
1800 rpm
Cutting Oil
Pump Motor ½ HP 3600 rpm
Floor
space: 61¼
x 84¼” (1556 x 2140 mm)
Net Weight 14,500
lbs (6577 kgs)

This equipment is located in GB