Gleason 641 Bevel Gear

Listing description

Description
Extreme Ratio 10:1
Root Angle Range -8 To 90 Deg
Gear Diameter - Max 16.000" (406.40MM)
Examples of Max. Pitch Dia.w/ 35" Gear Spiral Angle
And Max Cutter Dia.At The Following Ratios : ( Using
12" Cutters) 1 x 1 13.500" (342.90MM)
2 x 1 16.000" (406.40MM)
5 x 1 16.000" (406.40MM)
Max Radial Setting 6.983" (177.40MM)
Diametral Pitch - Coarsest 2.0 DP (12.70 MOD)
Full Depth - Max 1.000" (25.40MM)
Face Width - Max 2.600" (66.00MM)
Index Range 5-10 Inclusive
Work-Spindle Dia Of Taper Hole @ Large End 3-29/32 (99.22MM)
Taper Per Foot 39/64" (15.48MM)
Depth Of Taper 6" (152.40MM)
Dia Of Hole Through Spindle 3.0625" (77.79MM)
Cutter Dia (s) 2.75",3.75",4.5",6",7.5",9",10.5",12" (100,125,160,200,250,300MM)
Cutter Speeds 15 - 250 RPM
Cycle Time Infinitely Variable From 4.5 Sec /Tooth - Min
WorkHead Settings :
Offset Above Centre - Max 2.25" (57.15MM)
Offset Below Centre - Max 2.25" (57.15MM)
Machine Center To Nose Of Spindle - Max 14.50" (368.30MM)

This equipment is located in US