Haas MiniMill

Listing description

capacity : 12" X 36" TABLE, 16 X 12 X 10
X Axis 16 " 406 mm
Y Axis 12 " 305 mm
Z Axis 10 " 254 mm
Spindle Nose to Table (~ max) 14.0 " 356 mm
Spindle Nose to Table (~ min) 4.0 " 102 mm
TABLE S.A.E. METRIC
Length 36 " 914 mm
Length (Work Area) 28.75 " 730 mm
Width 12 " 305 mm
T-Slot Width 5/8 " 16 mm
T-Slot Center Distance 4.33 " 110.0 mm
Number of Std T-Slots 3 3
Max Weight on Table (evenly distributed) 500 lb 227 kg
SPINDLE S.A.E. METRIC
Max Rating 7.5 hp 5.6 kW
Max Speed 6000 rpm 6000 rpm
Max Torque 33 ft-lb @ 1200 rpm 45 Nm @ 1200 rpm
Drive System Direct Speed Belt Drive Direct Speed Belt Drive
Taper CT or BT 40 CT or BT 40
Bearing Lubrication Grease Packed Grease Packed
Cooling Air Cooled Air Cooled
FEEDRATES S.A.E. METRIC
Rapids on X 600 in/min 15.2 m/min
Rapids on Y 600 in/min 15.2 m/min
Rapids on Z 600 in/min 15.2 m/min
Max Cutting 500 in/min 12.7 m/min
AXIS MOTORS S.A.E. METRIC
Max Thrust X 2000 lb 8896 N
Max Thrust Y 2000 lb 8896 N
Max Thrust Z 2000 lb 8896 N
TOOL CHANGER S.A.E. METRIC
Type Carousel Carousel
Capacity 10 10
Max Tool Diameter (full) 3.5 " 89 mm
Max Tool Weight 12 lb 5.4 kg
GENERAL S.A.E. METRIC
Air Required 4 scfm, 100 psi 113 L/min, 6.9 bar
Coolant Capacity 40 gal 151 L
WORKING CONDITON
As is

This equipment is located in CA