Listing similar to "Hankook Protec-9nc Oil " 60

Viper VT-40A

Year: 2006
Location: USA USA
Viper - CNC Turning Center | 34" x 37" Year Built: 2006 Specifications Swing Over Bed: 34" Swing Over Cross Slide: 27.95" Max. Turning Diameter: ...

Doosan PUMA 3100

Year: 2011
Location: Slovakia Slovakia
Total weight (approx.): 5850 Spindle hole diameter: 115 mm X-axis stroke: 293 mm Stroke in the Z axis: 830 mm Circulation diameter above the be...

KSI SM-20

Year: 2009
Location: USA USA
KSI SM-20 7-AXIS SWISS TYPE CNC LATHE NEW: 2009 SPECIFICATIONS: MAX. TURNING DIAMETER ............ 0.787" MAX. SPEED ..........................

Hardinge Elite 27MS

Year: 2007
Location: USA USA
HARDINGE ELITE 27MS CNC TURNING CENTER NEW: 2007 SPECIFICATIONS: SPINDLE CONFIGURATION ....... A2-4,5C ROUND COLLET CAPACITY ....... 1.062" (27...

Clausing Metosa C1340

Year: 2006
Location: USA USA
Year of manufacture 2006 Swing over bed 13-3/16” Swing over gap 19-1/4” Swing over carriage 12-3/16” Swing over cross slide 6-7/8” Bed width 10" Ga...

Star SB-20E

Year: 2011
Location: USA USA
STAR SB-20E SWISS TYPE CNC LATHE NEW: 2011 General Specifications per Manufacturer's Brochure (specifics to be confirmed by the buyer) CNC C...

VanGuard CW6293C

Year: 2008
Location: USA USA
New - 2008 SPECIFICATIONS: Swing over Bed............................................................36" Swing over Carriage.........................

MAZAK Integrex 200-Iv

Year: 2007
Location: USA USA
Max. Swing Over Bed: 26" Max. Machining Length: 39.1" Bar Capacity (Both Spindles): 2.5" Through Hole Diameter (Both Spindles): 3" Main Spindle...

Vanguard CW6293C,5-1/4"

Year: 2008
Location: USA USA
SPECIFICATIONS: Swing over Bed............................................................36" Swing over Carriage.....................................

Eisen PA4560

Year: 2013
Location: USA USA
New - 2013 SPECIFICATIONS: Center Center Height..................................................22.63" (575mm) Swing Over Bed.......................

Mori Seiki 4300 DCG/1500 T

Year: 2012
Location: USA USA
Maximum Swing: 28.74" Swing Over Turret 2: 15.75" Maximum Turning Length: 58.98" Bar Work Capacity: 3.54" Maximum Distance Between Centers: 73.31" ...

Ganesh TY5040CNC

Year: 2011
Location: USA USA
Machine Type: CNC Lathes Year: 2011 Manufacturer: Ganesh Model: TY5040CNC Control: Fagor 8055i-TC Condition: Good Capacity...

Spinner TC 600 - 65

Year: 2013
Location: USA USA
2013 Spinner TC 600 - 65 Control: Siemens Sinumerik 840 D Condition: Very Good Under Power: Yes Specifications: Spindle Bore: 2.55" Turre...

Hyundai Kia SKT400m

Year: 2006
Location: USA USA
Swing Over Bed ........................... 28" Swing Over Cross Slide ................... 21.26" Bar Capacity ............................. 3.54" C...

MORI SEIKI Nt4200/1000Sz D

Year: 2008
Location: USA USA
Max. Workpiece Swing: 28.7" Swing Over Cross Slide: 15.7" Max. Turning Diameter: 13.6" Max. Turning Length: 41.8" Distance Between Spindles: 53...

HESSAPP 1200-11 CNC Ver

Year: 2009
Location: USA USA
Table Diameter: 31.5" Maximum Turning Diameter: 47.24" Maximum Swing: 49.21" Z-Stroke: 37.40" Maximum Height of Workpiece and Chuck: 31.50" Speed R...

OKUMA Twin Star LT-20

Year: 2008
Location: USA USA
2008 Okuma Twin Star LT-200MY Condition: Good Under Power: Yes Specifications: Swing Over Saddle: 15.75" Max. Distance Between Spindle Nose: 37.8...

MOTCH 219D CNC Twin S

Year: 2007
Location: USA USA
Chuck Size: 24" 3-Jaw on One Side Maximum Swing: 25" Maximum Spindle Speed: 2800 RPM Spindle Nose: A2-11 Spindle Motors: 50 HP Right Head Cros...

Victor S2680B Precisio

Year: 2006
Location: USA USA
Equipped With: Sony 2-Axis Digital Readouts 12.5" 4-Jaw Chuck W/Jaws - Steady Rest - Tool Post Hardened & Ground Bed Ways - Inch/Metric Threading #...

Mori Seiki NZX-1500/800SY

Year: 2016
Location: USA USA
2016 Mori Seiki NZX-1500/800SY Lathe with twin spindles, twin turrets, Y axis on the upper turret, Live tooling. There is a 2005 LNS 4' magazine ba...

Hankook Protec-9nc Oil

Year: 2011
Location: USA USA
Swing Over Bed ...................... 37.4" Swing Over Carriage ................. 24.8" Max. Turning Length ................. 151" Distance Between...