KSL-1700X-A2 is a CE certified bench-top high temperature muffle furnace. The furnace consists of high quality alumina fiber brick and MoSi2 heating elements with chamber of 8"x8"x12", and the temperature is controlled by high precision SCR (Silicon Controlled Rectifier) digital controller with accuracy +/-1 °C and 51 segments programmable up to 1600 ° C or 2912 F. It is an ideal tool for materials annealing and sintering in your research laboratory.
Furnace construction : Double shell steel case with cooling fan to keep outside case cool. High purity alumina fiber insulation for max. energy saving
Inside chamber size& material :200Lx 200W x 300D mm (8 x 8 x 12 inch), 12.0 Liter Energy saving 1800 grade fibrous alumina insulation High purity Al2O3 coating
Standard working temperature :1600°C or 2912° F
Maximum working temperature :1700°C or 3092° F (< 3 hours)
Temperature control :PID automatic control via SCR power control, e.g. current limiting phase angle fired the resistor with 51 steps programmable
Heating rate :0~20°C / min (suggestion
Temperature accuracy :+/- 1° C
Temperature Uniformity :+/- 5°C over 120 mm (5") @ 1700°C +/- 2°C over 80 mm (3") @ 1700°C
Heating element :1800 grade MoSi2
Thermocouple :B Type
(Pt-Rh to Pt-Rh) with Alumina tube
Working voltage :AC 208V-240V single phase, 50/60 Hz (50A air breaker required)
Max power :4KW
Outside size :550 x 540 x 620mm
Net weight :135 Kg (286 lbs)
Warranty :One year limited warranty (Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty)
Certificate :CE certified
MoSi2 Heating Element, installed in furnace,4 pcs
02 B-Type Pt-Rh to Pt-Rh Thermocouples with Alumina Protection Tube,1 set
Al2O3 Sample Plate ($95.00/ea),1 pc
Al2O3 Furnace Door Block ($95.00/ea),1 pc
Protection Glove, 1 pair
Crucible Clip ($25.00/ea),1 pair
Operation Manual, 1 set
MoSi2 heating element is used in the high temperature under oxidizing atmosphere. It will form the SiO2 film which can keep the element from being melted. During the oxidizing process, the SiO2 protecting film is formed again when the element continues to be used. The MoSi2 heating element must not be used in the temperature between 400°C and 700°C for a long time, otherwise the element will be cremated under the strong oxidizing function in the low temperature.
We are unable to take responsibility for custom delay & tax, as delivery time & tax all depend on shipping provider & Customs.
PLEASE CONTACT US IF YOU HAVE ANY QUESTION.