Hauser CNC,Fanuc 21I-M

Listing description

Fanuc Control retrofit (2005) by, Swisstronic Precision.

SPECIFICATIONS:
Table Size..........................................630 X 770mm (24.8" X 30")
Table Weight Capacity......................................500kg (1,100 Lbs.)
Table T-Slots (6).................................................14mm (.55")
X-Axis Travel - Table Movement..................................650mm (25.6")
Y-Axis Travel - Headstock.......................................450mm (17.7")
Z-Axis Travel - Stroke of Quill.................................160mm (6.25")
W-Axis Travel - Headstock Cross Travel..........................500mm (19.5")
Distance Between Columns........................................750mm (29.5")
Distance Between Spindle Nose & Table.....................10-670mm (4-26.25")
Table Travel Speeds.....................................800mm/min. (31.5 IPM)
Table Feed - Milling Speeds....................0.1 - 6m/min. (.004 - 240 IPM)
Table Feed - Rapid Advance..................................6m/min. (240 IPM)
Headstock Feed - Milling Speeds................0.1 - 6m/min. (.004 - 240 IPM)
Headstock Feed - Rapid Advance..............................6m/min. (240 IPM)
Feed Motors...................................................1.15kW (1.5 HP)
Spindle Speeds -(Low-High) Stepless.................20-1250 and 1250-4000 RPM
Quill Feed - Motorized Advance........0.01-0.39mm/rev. (0.00039-0.0153"/rev.)
Quill Diameter....................................................95mm (3.7")
Spindle Taper..........................................................40 ISO
Spindle Motor....................................................5kW (6.7 HP)
Electrics.......................................380V/440V / 3 Phase / 50/60Hz
Approximate Dimensions................2300 X 2700 X 2400mm(91"L X106"W X95"H)
Approximate Weight......................................6000 Kg (13,300 Lbs.)

EQUIPPED WITH:
GE Fanuc Series 21i-M Controller and Fanuc Drives (Swisstronic Retrofit, 2005)
Isolated Mounted Control Station w/ Directional Control Screen
Depth Display Z-Axis (Quill Movement)
Spindle Speed Gear Selector with Variable Speed Control
Spindle Speed Monitoring
Spindle Direction Reversable
Joystick Control in Jog Mode for X,Y,Z-Axis
(4) Selectable Increments for Quill Movement:0.001/0.010/0.100/1.000mm
Automatic Clamping Pin
Automatic Tool Shutdown

*Preliminary Specifications Subject to Verification.

This equipment is located in US