Homag BAZ 20/40/14/3/KA Wood CNC machining centre

Listing description

CNC machining center
Make: Homag
Type: BAZ 20/40/14/3/KA

Technical specifications:
- Workpiece length min. 500 mm, max. 4000 mm
- Workpiece width min. 300 mm, max. 1200 mm
- Workpiece thickness approx. 38 mm

Technical data edge material:
edge height
- max. 65 mm (min. edge overhang per side 2 mm)
- when butt-gluing or processing multiple edging lengths, edging height max. 45 mm

edge thickness
- Plastic 0.4 - 3 mm (depending on the material, e.g. PVC min. 1 mm)
- Veneer 0.4 - 2 mm
- Processing with plastic edges max. 135 mm2
- with veneer max. 90 mm2

Butt joints only possible on the surface or arch - not on the corner. Straight section at least 250 mm. Radius min. 300 mm.

Maximum travel speeds:
- max. 80 m/min. in X and Y direction
- max. 30 m/min. in Z direction

Furnishing:

Main spindle 12 KW, HSK 63 F, water cooled
- Tool weight max. 6 kg including holder.
- Tool length max. 200 mm from the lower edge of the motor spindle
- Tool Ø max. 180 mm for milling tools, max. 200 mm for grinding tools
- Speed range continuously programmable from 1500 - 18000 rpm.

Plate changer 12-fold
Tool length max. 200 mm from the lower edge of the motor spindle
Possible equipment:
- 12 x Ø max. 130 mm or
- 6 x Ø max. 180 mm and
- 6 x Ø max. 70 mm
- Tool Ø. max.200 mm for grinding tools

Gluing unit 360° for main spindle
- 1 pressure roller diam. 50mm for pre-pressing
- 1 squeezing roller diam. 35mm
- Inner radius min. 30 mm at 90° corner

Stop system for KA table
- consisting of 4 stop bolts (1 piece per bracket) as a longitudinal stop,
- 1 transverse ruler as side stop

2 water ring vacuum pumps with 66 m3/h each
(corresponds to the output of a 100 m3/h rotary vane vacuum pump)

Articulated belt conveyor 1300mm conveying height X 850MM belt width, incline angle 35°

Conveyor inlet B20
for the automatic transport of pre-aligned workpieces

Workpiece transport by a controlled traverse with integrated vacuum lifting device
- Dimensions: 1220 x 970 mm
- max. workpiece weight: 120 kg
- max. workpiece dimensions 5000 x 1200 x 60 mm

Conveyor outlet B20 on the main spindle
- for the automatic discharge of workpieces onto a roller conveyor
- The workpieces are transported by a vacuum lifter next to the main spindle
- Dimensions: 280 x 200 mm
- max. workpiece weight: 80 kg
- max. workpiece dimensions 5000 x 1200 x 60 mm
- Stove and sink cut-outs remain in the worktop.
- Outfeed of oversized panels with console support

External pre-cutting station and 1-fold roll
The roller plate is set up on the operator side.
- Roller Ø. 800mm
- Edge length min. 350 mm
- Edge height max. 65 mm

Software position measurement CNC coordinates

barcode reader

Probe for subframe

This equipment is located in DE

Please note that this description may have been translated automatically.