Hot Press Orma Npc 6/95

Listing description

Description

Structure entirely made of welded and tool machined beams. Hydraulic system: the rams are thickness chromed to grant a perfect flowing and a higher working life either of the seal gaskets and of the piston itself. All the cylinders are bolted to the structure, so to be easily removed in case of servicing. Highly reliable hydraulic power unit fitted with a double stage pump, first stage a low pressure and high delivery to move up the platen, second stage at high pressure and low delivery to get the working pressure set by the operator on the keyboard. Hydraulic power unit motor plunged in oil bath to get a better cooling and to reduce noise, and further more to avoid any possible damages caused by accidental shocks. Electric system: general switch board from where the operator can set and use all the functions of the press.

TECHNICAL FEATURES

Double rack system to guarantee a perfect platen movement. Nr. 2 groups on the length and nr. 2 groups on the width connected between them by a torsion bar.
Lift look
Matal safety covers
Renforced lower cylinders plates
Cylinders thrust plates
Easy access hydraulics
Leveling bolts
Heating systems:
Electric boiler for thermal oil
Limit switch for press opening
Perimeter E-stop system
Platens
Fabricated steel platen

ABS Control board with Siemens touchscreen control system which allows to set all machine functions
Platen size 3000 x 1300 mm.
Total thrust: 90 ton
Cylinders: 6
Diameter Pistons: 70 mm.
Stroke 400 mm.
Pressure kg/cmq 3,3
Total installed power 24 kw
Machine weight kg 3280
Documents: operation and maintenance manual, spare parts catalogue, electrical sheet, software manual, CE declaration of conformity

This equipment is located in IT