-
Machinery
Choose from 20,418 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
CUBE.460 - The system for automation in the manual soldering area
The new CUBE.460 entry-level soldering system is designed as a production cell for small and medium batch sizes. With the loading shuttle, it is possible to perform THT assembly directly on the machine, at the same time as significantly improving quality when compared to manual soldering. The simplified graphical programming gives you a quick entry into selective soldering technology. Benefit from the professional functions and proven technology available in the larger systems, such as process monitoring or bus-capable DC servomotors.
Circuit boards or components up to 460 x 460 mm, with or without lead content, are processed with quick-change, flexible soldering nozzles. In the design, particular attention has been paid to simple setup and maintenance, through good accessibility.
The capability of setting the soldering angle to 0° and 7° with program control makes it possible to use various soldering nozzles under optimum conditions for each one. This means difficult layouts can often be achieved, with ultra-narrow clearances.
The CUBE.460 is excellently suited to using various solders when our set-up carriage is employed. Increase your throughput and flexibility by a second soldering module with program-controlled stroke. The standard microdrop fluxer achieves a precise application pattern for fluxing with very few residues. High-performance quartz pre-heating guarantees efficient pre-heating and low energy consumption. The process observation camera helps you to optimize the process.
CUBE.460 Software
INERTEC has worked on the software GUI (Graphical User Interface) specifically for simplified operation. The control system for the CUBE is based on the systems from the ELS 3.3 and EMLS product lines which have proven themselves over many years. Programming can be carried out without having to dispense with the convenience of offline software. The software has been expanded to include a warpage correction module. This makes it possible to compensate for circuit board warpage by correcting the z-axis. During the programming, the circuit board warpage is visualized at every point and transferred into the program.
Also the RT-Console control program now impresses with additional modules. The statistical module records the circuit boards that are produced. The production figures can be called up subsequently (according to DMX code or program name). A line plotter function makes it possible to log the analog measurement values (such as solder temperature, nitrogen temperature) on a 24/7 basis. Barcode integration, automatically time functions, integrated maintenance reminders as well as online access are standard functions and included in the software. The CUBE.460 is excellently suited to using various solders when our set-up carriage is employed.
Specifications
Dimensions with Shuttle : 79" x 61" x 50"
Dimensions without Shuttle: 59" x 61" x 50"
Weight: 1764 lbs
Exhaust opening: 6in
Extraction Rate: 400m³/h
Power Requirements: 3x32 A; 3x400V, 50 Hz; 6KW
Control
OffLine Software: Offline software for easy programming
Axis Type: XY-Portal; Z-Axis Lift
Axis Movement: Combination of toothed belts and ball screw
Drive Concept: DC Servo motors with encoders; CAN-BUS
Repeatability: ±0.15 mm (±0.006)
Board Size
Dimensions min/max: 20x20mm / 460x460mm (0.8" x 0.8" / 18" x 18")
Soldering Angle: 0°
Bottom side clearance: 30mm
Top Side Clearance: 150mm
Flux System
Fluxer Type: Micro Drop
Flux Container: 3 litre oressurised nnt with level indicator
PreHeat
Type: quartz rods
Power : approx 4KW
Solder Pot
Solder pot (big size) enables to add a Solder volume lead·free (45 Kg) / leaded (50 Kg) second mini wave module: Solder volume lead·free (45 Kg) / leaded (50 Kg)
Warm up time: Circa 45 minutes
Solder Temperature: Maximum 330°
Solder Temperature Control: solder aggregate
Solder wave height control: Program controlled
Nitrogen consumption: Depending on User soldering nozzle 1-3m³/hr
Process Camera: Camera to view the soldering process
Trolley and Exchangeable solder pot: Exchange of the soldering aggregate lor the use of different alloys
This equipment is located in US
Manufacturer | Inertec |
Model | Cube 460 |
Year | - |
Country | USA |
Condition | Good |
Main category | PCB and SMT equipment |
Subcategory | Soldering Machine |
ID | P10728014 |
Client type | Machinery dealer |
On Kitmondo since | 2007 |
Number of listings | 0 |
Country | USA |
Employees | 1 - 10 |
Established | 2000 |
Last activity | Aug. 31, 2022 |