-
Machinery
Choose from 20,527 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
The IQM MICROSTEP SPLR 6001.25 Pr BEM 12 CNC plasma cutter was manufactured in 2008 by the Slovak company IQM s.r.o. Thanks to the rotary head tilted by ± 50 degrees, it is possible to cut sheets of various thicknesses - 25 mm with a burner tilt of 50 degrees, 35 mm with a burner inclination up to 25 degrees and 50 mm with a zero burner inclination. The working table has a bridge structure with pneumatically opened sections, and its dimensions are (L x W) 6000 mm x 2500 mm. The burner is equipped with, among others in: MSNC 500 CNC control, AsperWin software with AsperBevel module or Hypertherm HPR 130 plasma unit. The total weight of the R-SPLR 6001.25 PrBEM12I (G) plasma cutter is 5000 kg.
Technical data of the IQM MICROSTEP R-SPLR 6001.25 PrBEM12I (G) CNC plasma cutter
- dimensions of the working table (length x width): 6000 x 2500 mm
- type of working table: bridge with pneumatically opened sections
- maximum cutting thickness:
25 mm (at a burner inclination of 50 degrees),
35 mm (with the burner tilted up to 25 degrees),
50 mm (zero torch tilt).
- torch axis tilt range: ± 50 degrees
- B axis rotation range: 800 degrees
- angular speed of the A and B axes: 130 deg./s
- portal with double torch guide, driven by a DC servo motor
- double drive in the X axis
- 500 mm ventilation section, pneumatically opened
- power supply: 400/230 V, 50/60 Hz
- power: 3 kW
- total weight of the R-SPLR 6001.25 PrBEM12I (G) burner: 5000 kg
Equipment of the CNC plasma cutter IQM R-SPLR 6001.25 PrBEM12I (G)
- CNC control: MSNC 500
- software: AsperWin with AsperBevel module
- plasma unit: Hypertherm HPR 130
- filter unit: TEKA 4H - 10.000
- ink marker: Rea-Jet Elink
- rotary head that allows cutting at an angle
- voltage control of the position of the plasma torch over the material being cut
- guides on REXROTH rails with straight racks and oblique teeth
- sensor preventing the burner from hitting an obstacle
- drill: BEM 12
This equipment is located in PL
Manufacturer | Iqm Microstep |
Model | R-SPLR 6001.25 PrBEM12I(G) |
Year | 2008 |
Country | Poland |
Condition | Good |
Main category | Metalworking Machinery |
Subcategory | Flame or waterjet Cutter |
ID | P20210471 |