Kaltenbach SKL450NA

Listing description

USED KALTENBACH FULLY AUTOMATIC NON FERROUS (ALUMINUM) MITERING CIRCULAR SAW MODEL SKL450NA, STOCK NO 10679, YEAR 2006

Brand: Kaltenbach
Model: SKL450NA

Cutting capacities:
Round at 90 deg: 5.3" w/15.75" blade, 6.3" w/17.72" blade
Square at 90 deg: 4.9" w/15.75" blade, 5.7" w/17.72" blade
Flat at 90 deg: 11.8" x 15" w/15.75" blade, 12.6" x 1.9" w/17.72" blade
Flat at 45 deg: 8.6" x 2.3" w/15.75" blade, 9.8" x 1.5" w/17.72" blade, 2.3" x 5.1" w/15.75" blade, 3.9" x 5.9" w/17.72" blade
Saw blade dimensions: 15.75" / 17.72" dia 50mm center bore
Automatic shuttle stroke: 0.4" - 40" (can multi stroke to 80")
Minimum remnant length: 2.4"
Cutting speeds: 1,750 / 3,530 RPM
Number of speeds: 2
Blade motor: 5/6 H.P. (dual)
Coolant type: Mist
Air requirements: 90 PSI
Dimensions: 108" x 60" x 74"
Weight: 3,300 Lbs.

Equipped with:
• Pneumatic workpiece clamping. Vertical clamp with short stroke clamping cylinder, 0.3”. Crank handle for presetting. Aluminum clamping block.
• Workpiece stop adjustable to the front by 1.6” and to the rear by 2.6”.
• Polished turn table for miter cuts. Mitering range 180°.
• Material feed unit with electro-mechanic feed. Pneumatic gripper, mounted on left side of machine, for cut-off length from 0.39” – 80”, 40” per stroke. Adjustable front gripper clamp cylinder, stroke 0.4”. Rear gripper jaw retracts for non-contact return stroke. Length setting via motor with push button. Fine adjustment by hand wheel, electronic digital read-out. Automatic end piece recognition via light barrier and contact-free measuring system. Minimum end piece length 2.4”. Ball bearing supported transport rollers 2.4” x 13.0”. Counter for preselection of required number of cut-offs.
• Hydro-pneumatic saw blade feed, infinitely variable.
• Automatic coolant atomizer system.
• Large machine door for easy access and change of saw blade.
• Raisable safety hood for machine and feed unit with window to the entire working area. Working area illumination.
• Compressed-air connection 90 PSI is necessary

This equipment is located in US