Kennametal Extrude Hone Vector 200 8/6 Abrasive Flow Machine

Listing description

SPECIFICATIONS:
Media Cylinder Diameter....................................................8"
Media Cylinder Capacity.........................................628.3 Cu. In.
Media Stroke Length.....................................................12.5"
Hydraulic Cylinder Diameter................................................6"
Clamping Cylinders Stroke.................................................20"
Hydraulic Clamping Force.............................................29.4 Ton
Opening Between Tooling Plates - Maximum..................................22"
Worktable Height..........................................................41"
Distance Between Columns..................................................36"
Compressed Air Required................................................58 PSI
Media Extrusion Pressure (Minimum - Maximum)...................200 - 1400 PSI
Media Delivery Rate (8.8 GPM).........................0 - 2,053 Cu.In./Minute
Expansion Diameter - Maximum.............................................8.7"
Hydraulic Power Unit...............................10 HP, 208/460, 3/60 Cycle
Pump Capacity @ 1750 RPM................................................5 GPM
Pressure.......................................................350 - 1500 PSI
Approximate Overall Dimensions - Closed................42" L x 52" W x 104" H
Approximate Weight.................................................5,000 Lbs.
EQUIPPED WITH:
Allen-Bradley Micrologix 1200 Analog Input Module (Programmable Controller)
Magelis Operator Interface Terminal with Touch Screen Control
Banner Opto-Touch Anti-Tie Down Safety Device
HP (High Pressure Option)
HPU (Air Heat Exchanger Option)
Standard functions include Remote Media Pressure Adjustment, Real Time Display
of Media Piston Position, Automatic and Manual Mode, A Displacement Counter,
a Cycle Counter and a Cycle Timer.
Machine Process Parameters are preset via the Operator Interface Terminal and
can also be monitored on the Terminal once the Automatic Cycle has been
initiated.
Books, Manuals, Drawings and Ladder Logic
*Preliminary Specifications Subject to Verification.

This equipment is located in US