MANCORP 6 ZONE CR 6000 Reflow oven CR-6000

Listing description

This is the CR-6000 Hot-Air Reflow Soldering Machine from Manncorp.
It transfers heat using 6 independently controlled heating zones.
The machine is equipped with a conveying system consisting of chain plus mesh belt.
This unit is used mainly for the reflow of surface mounted components to PCBs
In the electronics manufacturing industry.
The overall dimensions are 3.8 by 1.2 by 1.55 meters given it a very efficient footprint.
The width of the conveyor mesh is 570 millimeters.
The width of the conveyor chain track can be adjusted from 50 to 450 millimeter
The height of the tunnel aperture is 64mm from the conveyor mesh.
The speed of the conveyor can be adjusted from 0.4 to 1.8 meter per minute.
The temperature control range goes from room temperature all the way to 350 degrees centigrade.
The temperature control is achieved using a PID algorithm that guarantees consistent
Results to a +/- 1 degree C of accuracy.
The rise time is normally less than half hour.
The unit is equipped with a UPS in case there is a power outage.
The unit is in perfect condition and the user friendly windows based controlling software is included.
Here we can see an example of the settings for a particular profile saved in the unit.


The resulting temperature on the PCB can be monitored and adjusted using a thermocouple
Set included with the system.
Here is an example of the actual temperature on the pcb with the current settings.



The unit requires a tree phase 220 Volt supply system that is capable to supply 10KW per phase.
The unit also requires 2 flexible vents that bring the exhaust fumes outside the building.
Machine weighs 1540 Kg.

This equipment is located in US