mazak integrex e-1060v/8 ii

Listing description

equipment details

mazak integrex e-1060v/8 ii
5-axis multi tasking machining center
new: 2011
x-axis (table forward/backward)……… 73.82″
y-axis (spindle head travel right/left). 41.73″
z-axis (spindle head travel up/down)…. 52.96″
b-axis (spindle head tilt)………….. 150 degrees
c-axis (table rotate)………………. 360 degrees continuous
max machining diameter……………… 49.21″
maximum workpiece (height & diameter)… 49.21″ x 49.21″
pallet size (2 chucks): 39.4″ 4-jaw independant chucks
machining spinde:
max spindle speed………………….. 10,000 rpm
spindle taper……………………… cat-50 big plus
spindle motor……………………… 40/50 hp
turning spindle and chucks
max speed…………………………. 500 rpm
min index angle (c-axis)……………. 0.0001 degrees
motor…………………………….. 50 hp
machine size: 209.5″ x 298.7″ x 173.2″ tall
approximate machine weight: 85,600 lbs
equipped with:
– mazak matrix cnc control
– (2) 1000mm 4-jaw independant chucks
– 120 tool magazine
– laser tool measurement nc-4 for rotary tools
– superflow 1,000 psi coolant
– work measurement system omp-60 spindle probe
– automatic tool eye for turning tools
– air blast for nc-4 laser
inspect under power in plant

actual order sheet below:
mazak e-1060v8 machining center model 2011 p/n 5767
machine configuration with options:
(2) 1000mm 4-jaw independent chucks 2@$42,500 p/n jr3655767j0
120 tool magazine $ 61,500.00 p/n at0905767j0
chip conveyor concept 2000 $23,000.00 p/n cv1335767j0
laser tool measurement nc-4 (for rotary tools only) $14,600.00 p/n mt1045767j0
supeflow 1,000 psi coolant stage i $9,100.00 p/n xmsfl524007
work measuring system omp-60 spindle probe$8,700.00 p/n x7141921056
automatic tool eye for turning tools $7,500.00 p/n mt0325767j0
prep without high pressure coolant $6,500.00 p/n cs2675767j0
big plus cat-50 prep $4,400.00 p/n atxx25767j0
air blast for nc-4 laser tool measuring system $3,000.00 p/n csxx25764j0
ethernet operation included
work setting error compensation $1,000.00 p/n no6105764c0
palletech prep w/o cell controller $6,200.00 p/n fs0505767j0
matrix control w-dual risc chip technology(included) p/n nc2575767j0
absolute positioning system linear axes (included) p/n sf0795767j0
eia / iso g-code input (included)p/n no0985767j0
additional eia / iso g-code input (included) p/n no1395767j0
8mb program slot – drive board (included) p/n no1575767j0
eia / iso 5-axis simultaneous input (included) p/n no1165767j0
eia / iso tool tip control 5-axis (included) p/n no1175767j0
eia / iso tool radius control compensation (included) p/n no1235767j0
through the spindle coolant (included) p/n cs2165767j0
lathe spindle speed of 500 rpm (included) p/n sr5905767j0

standard options:
matrix control g-code & conversational programming
12.1″ color monitor w-dual 64-bit risc processors
e-tower with virtual foreman (all manuals, training sequences etc.)
remote cameras for 1st piece set-up and e-tower interface
ethernet interface (2) pcmcia slots type ii
20.0 gig of memory 3.5 floppy drive
preparation for optical part probe
high speed software for automatic feedrate control
(acceleration and deceleration software) g-61.1
5-axes simultaneous software input function
b-axis range of motion -30 – 120 degrees
thermal control system “chillers” for ball screws and motors
b-axis with roller cam design “no backlash”
10,000 rpm oil air mist milling spindle w/ 339 ft. of torque
big plus 50 / cat-50 tooling capability
50 horsepower milling / turn table capability
2-pallet changer
maximum turn table rpm = 500 rpm
full c-axis with .0001 minimum indexing increment
maximum workpiece height and diameter = 49.21″ x 49.21″
travels: x-axis =73.82″ y-axis=41.73″ z-axis=52.95″
rapid movement all axes 1,575 (i.p.m.) excludes b&c-axis
maximum cutting feedrate 1,575 (i.p.m.) excludes b&c-axis
flood coolant& niagara coolant (shower)
coolant fed ball screws
machine weight 83,775 lbs

This equipment is located in US