-
Machinery
Choose from 20,092 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
max swing / swing over cross slide…….. 20.87
maximum machining diameter (upper turret). 19.69″
maximum machining length……………… 33.62″
spindle bore / bar work capa………. 4.41″ / 4.02″
travel:
x-axis travel……………………….. 17.72″
z-axis travel……………………….. 35.59″
y-axis travel……………………….. 8.27″
b-axis travel……………………….. -30 to 210 degrees
main spindle:
chuck size………………………….. 8″
spindle speed……………………….. 2,000 rpm
spindle nose………………………… a2-8
minimum spindle indexing increment (c-axis) 0.0001 degrees
spindle bore………………………… 4.41″
spindle motor……………………….. 15 hp
sub spindle: (second spindle)
chuck size………………………….. 6″
second spindle speeds………………… 6,000 rpm
second spindle travel (w-axis)………… 35.55″
spindle nose………………………… a2-5
spindle bore………………………… 2.4″
minimum spindle indexing increment (c-axis) 0.0001 degrees
spindle motor……………………….. 15 hp
milling spindle: (b-axis)
milling spindle type – single spindle turret with atc
milling spindle speed………………… 12,000 rpm
max milling spindle torque……………. 49.3 nm (36.4 ft lbs)
b-axis min indexing increment…………. 0.0001 degrees
tool storage capa………………… 72 positions
tool shank………………………….. capto
spindle motor……………………….. 10 hp
machine size and power requirements
machine floor space (not including bar feeder): 127″ x 98″
machine weight: 23,500 lbs
required power capa: 39.3 kva
equipped with:
– mazak mazatrol matrix 2 cnc control with:
– eia/isa – 3-d coordinate conversion – g00 slope constant
– shape compensation – cylindrical (g07) – polar (g12)
– milling spindle sync – cardbus (2 slot) – lan port – usb
– thru coolant, 213 psi
– work unloading unit over second spindle
– lns quick load servo iii short magazine bar feeder
– royal rota-rack parts catcher and conveyor
– mp-250 tool probe
– programmable chuck pressure system
– maximum part program size 8 mb
– work measuring system, rmp 60
– spindle thru air while rotating
– chip conveyor
– 8″ 5-jaw chuck with 4.41″ bore for main spindle
– 6″ 3-jaw chuck for sub spindle
This equipment is located in US
Manufacturer | Mazak |
Model | Integrex I-100 |
Year | 2014 |
Country | USA |
Condition | Good |
Main category | Metalworking Machinery |
Subcategory | CNC Lathe |
ID | P00708314 |
Client type | Machinery dealer |
On Kitmondo since | 2015 |
Number of listings | 0 |
Country | USA |
Employees | 1 - 10 |
Established | 1990 |
Last activity | Oct. 27, 2022 |