-
Machinery
Choose from 20,511 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
Medipac model MF50 pharma grade rigid tube filling machine designed for automatic counting, filling tablets and sealing of rigid tubes.
Suitable for plastic or aluminium rigid tubes.
The complete unit consists of:
- vibratory tablet feeder
- cap feeder
- tablet table including belt conveyor with a scrambler, support frame, cartridge (format part) and a counting unit
- tube hub
- MF50 tube filling and closing machine
- FlexLink outfeed conveyor
- Cognex vision system with reject facility.
This machine has a capacity of 50 tubes per minute (at approx. 10 tablets per tube) and is suitable for the following tube and tablet range:
- tube length 50mm-200mm
- tube diameter 16mm-35mm
- tablet diameter 14mm-33mm
- tablet thickness 3mm–10mm
(note: each tube and tablet type can only be handled with a suitable set of format parts).
Supplied with one set of format parts on the machine as follows:
Rigid tube size - 26.8mm diameter x 85.5mm long
Lid on rigid tube size - 28.8mm diameter x 12mm thick
Tablet size - 22mm diameter x 6.8mm thick.
Empty tubes are loaded manually by the operator into the tube hub.
Tablets are guided from the tablet table into 8 separate channels where they are counted.
The pre-set distance between 2+1 pneumatic stop-pins guarantees accurate counting.
This distance can be adjusted to count odd as well as even numbers of tablets.
In auto mode this machine can feed, count, stack tablets in tubes, control the number of stacked tablets in each tube and close the tubes with a fitted push on cap.
There is a reject system for incorrectly filled tubes so only correctly filled tubes are forwarded to the secondary packaging area.
Correctly capped and filled tubes are fed out onto a FlexLink conveyor where they get coded via inkjet printing (printer not included) and then checked by the Cognex vision system for correct coding.
Manuals in English.
Voltage: 3 x 400 V, 50 Hz.
Power: approx. 2,3 kW (2,6 kVA).
Compressed air: 7 bar, 700 L/min.
Videos of this machine dry cycling available on request.
This equipment is located in GB
Manufacturer | Medipac |
Model | MF50 |
Year | 2010 |
Country | UK |
Condition | Good |
Main category | Process and Packaging |
Subcategory | Filling machines - Liquid |
ID | P11110010 |
Client type | Machinery dealer |
On Kitmondo since | 2009 |
Number of listings | 0 |
Country | UK |
Last activity | April 12, 2022 |