Microfluidizer M110P Laboratory homogenizer

Listing description

M110P Microfluidizer®
A 'Plug & Play' electric Laboratory homogenizer

The Model M-110-P bench-top microfluidizer has been designed to reliably achieve continuous operating pressures up to 30,000 psi. This ?plug and Play? instrument maximizes the energy-per-unit fluid volume which results in very uniform submicron particles.

This M-110P microfluidizer contains an on-board 2 hp electric-hydraulic drive that powers a single acting intensifier pump. Process pressures may be adjusted from 2,000-30,000 psi to produce the desired product results. As the reciprocating intensifier pump travels through its pressure stroke, the product is driven through the diamond interaction chamber. The fixed geometry micro channels accelerate the product stream to high velocities. The result is high-shear and impact forces giving the desired result. Upon exiting the interaction chamber, the product flows through an external cooling coil which regulates the product temperature. At this point, the product stream may be recirculated through the system for additional processing or sent to the next step in the overall process.

The recommended uses for the M110-P include:

· Cell disruption

· Production of nano-dispersions and nano-emulsions

· Microencapsulation in polymers, liposomes and oils

· Deagglomeration

Additional features include:

· Ability to achieve processing pressures up to 30,000 psi

· Produces product flow rate up to 125 mL/min

· Powered by a standard 120 VAC/60Hz single phase electric motor

· Fan cooled drive system

· Fits in standard laboratory chemical hood

· CE compliant

Specifications:

· Pressure range: 2,000 ? 30,000 psi

· Minimum sample size: 50 mL

· Flow rate (water): up to 120 mL/min

· Product temp limit: 73 deg C

· Power requirements: 60Hz/120 VAC/20 amp

· Dimensions (W x D x H): 31.5 ? x 22? x 19?

· Weight: 110 kg (242 lbs)

· Interaction chamber: Diamond F20Y, 75 micron

· Plunger material: Zirconia Ceramic

· Stainless Steel enclosure

· Drive Method: electric Hydraulic

· Product Pressure Gage: Mechanical

· Feed reservoir: Stainless steel

Looks like new. It was a demo unit. It is not used in the laboratory as equipment

This equipment is located in DE